| Thread | Last Post | Replies |
|
| 87 4x4 won't start...help please... | 21 Aug 2004 23:21 GMT | 1 |
Hi all. I have an 87 4x4 that won't start. First the truck had a 22R, now its home to a Chevy 350 w/ NV4500. I did the swap about 4 years ago and haven't had this problem until about 2 weeks ago. Turn the key and the solenoid would chatter but not engage the starter everytime. ...
|
| .re: older 4runners | 21 Aug 2004 19:56 GMT | 3 |
gregory trimper (trimper@spamcop.net) wrote:
>>Visionr42 wrote >> What years were the 22RE/5 speed combo used in 4runners? >Until Model Year 1995. |
| Adding an additional remote to a 2004 Tundra Double Cab | 21 Aug 2004 03:16 GMT | 1 |
Does anyone know how to add an additional remote to and existing alarm on a new 2004 Tundra double cab. The numbers on the back of the remote matches the existing working remote. Thanks
|
| Cornfed Suspensions | 20 Aug 2004 17:53 GMT | 1 |
Anyone have experience with Cornfed Suspensions? And do you know if they do installations too? Thanks. -Cyberbilly
|
| straight axle conversion brake question: | 20 Aug 2004 14:54 GMT | 2 |
I'm doing a straight axle conversion on an 88 Toyota pickup using an axle from an 84 diesel pickup. I've been told I can use the disc brake calipers from my 88 on the earlier axle if I use Land Cruiser rotors. Any idea what year FJ rotors I should be looking for? Either way, ...
|
| Electrical question for Tacoma...help please! | 20 Aug 2004 06:53 GMT | 6 |
I saw the post a little while back about the H4 headlights, and i thought this was a great idea! Sooo i started building my own woring harness using two relays with heavier wire.. I THOUGHT this was going to be fairly easy. There were even a couple schematic diagrams to follow. ...
|
| checking codes on toyota | 19 Aug 2004 20:42 GMT | 1 |
if I jumper TE1 and E1 will that give me a flash light at my engine light at the dash. trying to work from a manual and I'm confused. I am burning rich and cant idle after starting but can drive no problem , to maintain idle I have to rev at a stop.
|
| To Turn or Not to Turn? That is the Question! | 19 Aug 2004 11:54 GMT | 4 |
If you are replacing your Rear Shoes or Front Pads, do you absolutley have to Turn the Rotors and or Drums? If you do have to Turn what happens if you don't turn them? Thanks....
|
| 86 4 runner starting problem | 19 Aug 2004 09:06 GMT | 2 |
I have 86 runner moved from california to texas where the weather is very humid here.when summer rolls around i have a hard time starting it once it starts i have no trouble after that day starting it up .When i leave it park overnight in the gargage same thing over again and in ...
|
| Bucket Seats | 19 Aug 2004 06:22 GMT | 3 |
I had decided on a 2004 Tacoma Xtracab, but hated the 60/40 seat. The dealer can't find any with Bucket Seats. Can you replace the driver's side seat with a bucket seat? Where could I get one from?
|
| Swapping bench for buckets | 19 Aug 2004 06:09 GMT | 1 |
Anyone know for sure if buckets from a 2000 extended cab will fit in a 1998 std cab? I'm replacing the crappy bench. Thanks
|
| Engines for Dummies | 19 Aug 2004 01:55 GMT | 2 |
How about a primer on Toyota Engines? I see terms like 20r and 22r etc. What does it all mean? -CB
|
| Toyota Pick-up 1989 Blower Speed Control Unit | 19 Aug 2004 01:51 GMT | 10 |
I am unable to control the speed of the blower; either it is off or it runs at full blast. The intermediate speeds are not operating. The selector contacts are OK. I have to assume that the speed control unit is faulty. Questions:
|
| 22r - what a bad a.s!!! | 18 Aug 2004 17:13 GMT | 5 |
Lemee tell you (although I'm sure all already know...) the 22r is a bad little mother. This thing hauled 2 guys, guns, 2 dogs, food & water & equipment all OVER the damn mountains & NEVER MISSED A BEAT!! 3rd timing chain, and that is IT!! Nothing else!! 280k miles! I wanna be a 22r ...
|
| 22r Emissions question | 18 Aug 2004 08:44 GMT | 1 |
Regristration is up again, so i went to the emissions testing place today. The engine failed on the high idle CO reading. The standard is 1.20 and my truck is reading 2.11; any idea what causes this/ how to fix it?
|