I just recieved my new Hella headlight/H4 conversions with 100 watt hi
beams and 55 watt low beams and installed them last night.
They seem to provide more-than-enough light on both hi/low but on high
they seem to get awfully hot.  I'm afraid that they might fry the wiring

Truck is going into the shop tomorrow.  $4,888 to replace the bed, back
bumper, dents in the rear of the cab from where the bed got shoved up, and
blend the paint.  Also includes a Line-X bedliner, as that is what the truck
contained at the time of the wreck.  Any advice on how to ...

One day the truck was fine, the next day engine light came on and engine
light illuminated.  Engine light shows 2 blinks pause 6 blinks (error code
26) which indicates air/fuel mixture problem.  I checked the air filter,
vacuum lines engine ground strap and added BG44K fuel injector ...

pickup test by US govt
hahahha
Adios Tacoma
AHHAHAH

Chilton's manual states the following:
1. Start engine and bring to normal operating temp, then run engine above
1200 rpm
2. Backprobe w/ a high impedence averaging voltmeter between the oxygen

1995 Toyota 4Runner SR5
What type of information can I gather from the diagnostics port beside
codes?
I was thinking about picking up a code scanner.  I saw one that will display

Does anyone know of anything that can be done to the V8 in the Tundra to
increase power? And where can I find info on programming the factory keyless
entry? I would at least like to get rid of the beeps. I have a 2003 4wd
Access Cab. Any help will be greatly appreciated.

Is a Toyota oil filter better than a filter from a local auto supply?

Any one running the spacers in the front springs? I have a 2001 4wd Tundra.
And the spacers adds about an inch in height. I noticed a lot of  popping
coming from the front end. I suspect the upper ball joints are going. The
lift has been installed for about a year and less then 20 ...

I have a Black 2001 Tacoma 4x4 and oversized BFG all terrain KO's. I know
the type of box I want to put in but can't decide whether the box should be
black galvanized or uncoated galvanized. What do you all think looks best?

Got rear ended sitting in traffic on my way home from work today.  98 Tacoma
2wd Xtra Cab.  78,xxx miles, feel like she was just getting broke it.  Rear
bumper went up under the truck, the bed buckled.  Was hit by a 99 4runner
with a metal brush guard on the front.  Any idea on what ...

I have an 80 Toyota 4x4 with an 85 eng. The exhaust manifold has only
one bolt between cyl 2 and 3. I have seen two bolts between these cyl's
on other 85's. I would like to install a header on this engine and I
need to know what head I have.  

Hi, I have a number of problems that I have questions about.  I
appreciate any possible help and/or suggestions.  I have a 94 reg cab,
4x4 p/u, w/ a brand new 22re w/ 4000 miles, a lce efi pro cam-shaft,
lce header, 2.25" exhaust through hi-flow cat, muffler.  Also, a k&n

I have power windows on my 96 runner, and when ever I open the driver side
window it squeaks something awefull,  its not a mechanical metal on metal
squeal,  but is sounds like the glass itself squeaking against the weather
seal or something,

1980 4x4 longbox broken frame, parting out all but tranny.Hope,AK.