Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Toyota / Toyota Trucks / December 2004

Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
4x4 mods 03 Dec 2004 08:03 GMT2
if i install 31x10.5 tires on my 93 ext cab 4x4 do i need to change any
gear ratios or ring and pinion or ne thing or is it ok stock?
Why no Toyota full size vans in the US?03 Dec 2004 08:01 GMT5
I wonder why Toyota doesn't sell any of their larger vans such has the
Hi-Ace in the US. It seems the American full size van manufacturers
have been very stagnant and could use the competition. The Mercedes
Sprinter full size van is now being sold in the US through
96 T100: Brake light, engine noise, maint. sched...02 Dec 2004 22:45 GMT2
Got a 96 T100 SR5 4x4, about 160k miles on it.
Couple questions -
1) I don't have access to a chiltons or related,
and I have a brake light (not tail light) out.
"CLUNKS" when shifting02 Dec 2004 22:10 GMT9
  I hav an '03 Tacoma mini 4 cyl automatic 2wd with 41,000 miles on it.
My truck makes a terrible "CLUNKING" noise when it shifts into second
gear. This noise only happens when I am accelerating from a dead stop. I
have had no other problems at all. I have been told it is "axle ...
2005 tacoma vs 2005 mustang02 Dec 2004 21:55 GMT10
to buy the new tacoma 4x2 regular cab or the new mustang GT....that is
the question.
power steering02 Dec 2004 18:24 GMT3
Does anyone know what would cause a power steering pump on a 2001 tacoma
start to make noise comparable to engine valve knoking. I have change the
pump for a rebuilt one and it still makes noises, but only on cold start.
Thanks.
another brake noise that needs diagnosed02 Dec 2004 16:34 GMT1
I have a 1991 p/u truck 22re with 218,000 miles on it. The shop just
replaced the front brakes, had the rotor turned and now there is this
sound coming from the right front brake. (didn't have time to do it
myself) It only occurs after driving about 5 miles. Here is what
steering pulls and shimmys02 Dec 2004 02:11 GMT3
I have a 93 T100.  when I engage it in 4wd, the front end pulls, jerks
and shimmys.  I have replaced the idler arm which seemed to have a
worn joint, but it still does it. Any thoughts anyone.  I don't know
if the all the other joints are worn also, or if I'm just hitting the
ash tray insert needed01 Dec 2004 16:37 GMT6
My wife whom I love and adore and have done so for the past 20 years or so
did a major dumb the other day. Aside from the fact that I'm flabbergasted
that she would admit to such a thing I am in sort of a quandary. She drives
a '98 Avalon. Last week she pulled the ashtray insert ...
04 Tundra exhaust sounds01 Dec 2004 16:17 GMT5
04 Tundra AC V8 - 1700 miles or so - so far so good with a few minor
warranty items to be resolved. Coming from an 02 Taco Dbl-cab 4x4 TRD P/U,
the ride, power, room etc. are a real pleasure [or I'm just getting old and
appreciate the creature comforts much more].
91 P/U w/ 22RE runs rough???01 Dec 2004 12:25 GMT2
My '91, 2WD is fuel injected and has approx 130,000 miles on it. It misses
during idle and "bogs down" thru accelleration but "catches" and takes off
at times.  Have changed fuel filter, air filter, plugs, cap and rotor.
Wires only have a few thousand miles on them.  Open to any ...
4 wheelin mods01 Dec 2004 06:32 GMT3
what are some cheap mods that i can do to improve the 4 wheelin ability of
my 93 ext cab 4x4 5 spd.? gear ratios? new transfer case? i am a begginer
and i am not sure what i should do first?
lift kit size?01 Dec 2004 05:42 GMT1
if i bought this toyota from a dealer and they weren;t too sure on the lift
kit size, how can i tell what size lift kit i have?
learning about ball joints01 Dec 2004 05:32 GMT2
Hello all, I own a '90 PU with the V6, 4x4, 4''lift on 33's with 301K.  I'm
taking apart my tie rod end from the steering knuckle and i made the mistake
of using a hammer to dislodge the stud from the knuckle. now the tapered
stud seems to be firmly attached to the ball joint but ...
93 toyota 4x4 product search???01 Dec 2004 03:04 GMT1
i have a 93 ext. cab 4x4 5 spd. i am looking for a rear chrome bumper...?
does any one have one or now of a place to get them cheap?also i want to
install 31 inch tires. it has a lift kit. i want to improve the off road
use? what else should i replace?
Pages: 1 2 3 4 5 6 7 8 9 November, 2004
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.