| Thread | Last Post | Replies |
|
| We need more power !!!! | 11 Feb 2005 05:21 GMT | 3 |
Can anyone give any suggestions for my 94 ext 4x4 4-cyl. It is a DOG - no power. It has 140,000 on it and I just has the timing chain redone- I wish I would have put that money into a new engine. I had a 91 with a v-6 and 266,000 and it ran circles around this thing.
|
| Free cat | 11 Feb 2005 05:16 GMT | 12 |
Hello all, my lovely little cat decided he would try to hop up on the hood of my BRAND NEW 2005 Tundra!!! Arghh! So, now I have a nice scratch on my front bumper. Do any of you wise folk have a remedy for this situation, short of swimming lessons for the cat? The scratch did not ...
|
| Transmission Speed Sensor | 11 Feb 2005 03:30 GMT | 3 |
Ultimately, I found out that my transmission speed sensor is faulty. Will a faulty transmission speed sensor cause the transmission to slip which seems to happen in my case? Or the slipping is another issue? Thanks,
|
| 2003 Tacoma 4 cyl Fuel Filter Location? | 10 Feb 2005 04:29 GMT | 4 |
Mine is the SR5 Extended Cab 2WD manual transmission. I give up.....where have they hidden the fuel filter and why the Hell doesn't the owner's manual say ANYTHING about it?
|
| High cold idle speed | 10 Feb 2005 04:21 GMT | 1 |
I have 140 miles on my new 22RE engine (1989). I still have two (possibly related) idle issues. I did not experience these issues on my old engine. Cold idle speed ranges between 2,200 and 2500 rpm. Can this be adjusted
|
| '85 4x4 Toyota Pickup Pulls to the Left When Braking? | 09 Feb 2005 05:52 GMT | 1 |
I have an '85 Toyota 4x4 truck with a 22r engine and a 5 speed trans. Recently its been pulling to the left when i brake. I had a problem with the wheel bearing and inner axle seal on the left side and i fixed that hoping it would somehow solve my braking problem. It didn't and
|
| Tranny problem??? | 09 Feb 2005 02:48 GMT | 1 |
My '87 Toy 4x4 pickup, auto trans, is making a odd "clinking" sound whenever I come to a stop, usually right around 15-20mph. It sounds like it's coming from the front axle near the driver-side but I don't have the lockouts engaged or the truck in 4x4. Also, it doesn't do it ...
|
| 1999 4runner hesitation | 08 Feb 2005 17:35 GMT | 4 |
I have had a problem with hesistation when the accelerator is first depressed, in my 4 runner for several weeks. While trying to diagnose the problem, I would open the throttle body by hand in the engine compartment. It takes about a second after turning the throttle body for the ...
|
| Tundra brakes | 08 Feb 2005 04:11 GMT | 7 |
I have an '02 Tundra, V8 2WD. According to 3 dealers my VIN does not indicate any TSBs. I have had recurring brake pulsation issues. I had the front brakes done today, and the pads are about 4-3/4" long. Per
|
| Minor Shift Problem | 07 Feb 2005 21:53 GMT | 4 |
My '85 SR5 w/5 speed (169,992 mi) shifts perfectly when it's cold. After it warms up it grinds when shifting into first or reverse at a dead stop. I changed the gear oil from whatever was in there to Redline MT-90 but it didn't help.
|
| Line-X or Rhino Linings? | 07 Feb 2005 04:21 GMT | 6 |
I just got my 2005 Tundra tonight (yea!) and am trying to decide whether to do a Line-X or a Rhino Lining in the bed. Does anyone have any recommendations on which might be better? As far as I can tell, they're about the same, but I don't know much about either.
|
| wheel options for '86 pickup | 06 Feb 2005 03:20 GMT | 2 |
Shopping for alternatives to the stock steel wheels. I understand that the lug pattern is 5 X 4.5", but to what extent does offset need to be preserved? I think the factory wheel has low to zero offset. Some wheels that may work well:
|
| Tundra engine in a T-100 | 06 Feb 2005 03:06 GMT | 1 |
I have a 96 t-100 SR5 4WD with 6 cylinder engine. Its a manual transmission. I was wondering if a Tundra V8 engine and transmission can be installed in a T-100.
|
| 4x4 Toyota pickup V6 ---> 22R swap | 05 Feb 2005 22:48 GMT | 2 |
My brother bought a '93 4x4 'yota pickup with a cooked V6. The motor would not be nearly so bad, but the guy half-way disassembled the thing and left it to rust when he lost interest in the project. I have plenty of good 22R motors laying around and would like to know if it's
|
| 2001 Sequoia JBL 6-disc CD Problem | 05 Feb 2005 15:32 GMT | 2 |
The CD player is unable to eject or accept a CD. After ignition, it makes noises as though it is trying to eject but cannot. Pushing eject button makes the same noises but nothing comes out. Cannot add a new CD either. Cannot change a CD channel. I read earlier that I should ...
|