I'm new to this group I hope someone can direct me to a trans. '87 R22 5sp.
4WD for my truck. It seems that a noise, a mix of grinding a rolling ,
tumbleing noise, somewhat loud form the shifter area. I had done the clutch,
throwout bearing, pressure plate, changed the slave.. I had ...

Hey guys & gals,
I'm having a problem with my 98 RAV 4 4WD.  When I turn the wheel to the
extreme I hear a squealing noise.  As I approach the extreme limits of the
wheel I feel several 'jumps'.  I don't know how else to describe the feel I

    Has anyone out there upgraded their stock speakers? The orig's have a
'boomey' sound to them
such that I can't turn up the bass beyond 2 sometimes as the mid-bass gets
to be too much. Am

Here's some pictures
http://mysite.verizon.net/res0qmii/2005tacoma/

I have an '85 4x4 Toyota Pickup, with a 22r engine and I need to
replace the valve cover gasket.  I'm wondering if i should use gasket
sealer when i install the new gasket or is that unnecessary?  If i do
need it, what sealant should i use?

I have been looking and looking, but I have only found a few with 70s trucks.
Anyone know of any good, pull your own part ones in the LA area that have 90s trucks?
Thanks

I have a 1995 Xtra Cab pickup (not Tacoma), 2wd , 4 cyl., single caliper
brakes.   The inboard disk pads have worn out while the outboard pads still
have pleanty of material left.  What could be causing the uneven wear?
Thanks in advace for any help.

My wife drives a Honda and found an extremely dedicated outfit to take
care of it (complete computerized record keeping system for all work
done, maintenance reminders sent in the mail and their mechanics will
tell you exactly what they are doing and why, they also keep any parts