I am replacing the timing belt, water pump, seals, and tensioner pulley
on a 1990 toyota 4wd std bed truck with a 3vze engine.  The idler pulley
over the top water jacket to the radiator is stumping me on how to remove
it.  Is it "pressed" on over this water jacket necessitating ...

A friend just got her 2005 Tundra yesterday. The way she's cranking the
radio makes it clear she's going to fry the speakers pretty quickly, so she
wants to beef up the system. We're marinating some ideas.
1) Maybe add an amplifier first. Does the basic radio have preamp outputs?

After driving 2300 miles my battery and brake lights came on. I changed the
battery out, light is still on. Is it the altenator, some thing else...???

I am wondering if anyone can help me figure out what is wrong with my 1988
Toyota truck.  Just recently when I turn on the truck, it makes a short
grinding (or grating noise).  The noise only lasts for a few seconds, and
then the truck runs fine.  Although it is a '88 truck, it only ...

Guys,
I just installed a brandnew kevlar clutch in my 4runner. The clutch is
from southbend clutch and sports a 1600 lbs pressure plate.
Now that the clutch is in the first thing i notice is the clutch pedal

Hi, yeah Im a new to this Toyota trucks forum, unfortunately on COX cable so
I cannot go back in history too far...
So, question you Toyota owners, I am looking at the t100 pickups with the v6
(also considering the pre Tacoma's with v6)  Im looking then of course, of

I have too many choices.
Right now, I have an oddball mix of whatever the tire guy had used. My
truck loves nails.
Since the rubber is trashed, I am looking for new tires. My driving is

Can anyone tell me where the fuel filter is located on my 91 4runner ?

Not managed to get my hands dirty on this one yet but id just thought id
ask.
87 hilux 4x4 pickup, broken wheel stud in the rear (drum brake)
its sheared straight level with the wheel.

I've gotten tired of the continuous squealing from the speedometer in
my 91 4Runner. I've got a great deal of the dash pulled apart, but for
the life of me I can't seem to figure out how to get at the back of the
speedometer.

I have a question regarding tires for my 02' Tacoma. The shop I went
to could not get Toyo (at least not that day)  tires in the same size
as I had they were the original BF Goodrich tires sized at
P265/70R16's. They put P275/70R16's on and told me there would be

'95 T100 3.4 automatic.
Yesterday I pulled the intake snorkel from the throttle body and
cleaned the gunk out that was on and around the throttle butterfly. Of
course, I did it with the engine off. Quite a bit of crud too.

I'd like to prop a ramp up on the gate of my 2004 Tacoma double-cab
4WD, but I don't want to damage the gate by doing so. Anyone know what
a reasonable weight limit would be? The idea is to use the ramp to push
a 375lb motorcycle up onto the bed.

Entire driver side raked on rock face but running nicely,I bought it for
the tranny/transfer the remainder is up for moderately priced grabs?

Guys,
I am in the process of putting a new Kevlar clutch in my 4runner. 94,
V6.  I am wondering if the flywheel should be resurfaced or not.
it looks undamagd. You can still see the groves from turning but they