| Thread | Last Post | Replies |
|
| 1985 Toyota Pickup.. 3 brand new 22r dealer installed engines and same problem.. Help | 10 Sep 2005 13:49 GMT | 3 |
Here's my problem. Was given a 1985 Toyota pickup in January. Truck had 130k on it when received. Not two weeks later, the head gasket blew. I have a friend that works at Cain Toyota in Canton Ohio who told me just to swap a brand new engine in it since I didnt pay a dime for the ...
|
| 87 hilux pickup 4x4, leaking front ball joint | 10 Sep 2005 01:55 GMT | 1 |
Greetings all forum folks 87 hilux pickup 4x4 im currently restoring my lovely but very rusty truck. it has been stood for several months but still starts up fine. gotta love them toyotas.
|
| Fuel Leaking Problem | 09 Sep 2005 02:08 GMT | 2 |
I need some advice on what is that Black Canister in the engine compartment on the passenger side up against the Cab firewall. Mine is leaking fuel out the bottom and I can't ID what it is or how it works in order to test it. Anyone got any ideas. Is there another piece. All I ...
|
| Truck runs great but she don't look so well | 08 Sep 2005 15:03 GMT | 3 |
Truck runs great but she don't look so well. I would like to start on the beds cosmetics. Preferably a new one since this one is beyond the Swiss cheese syndrome. I'm new to the Toyota world and could use some helpful advice on replacements of the (floor bed, quarter panels ...
|
| 86 4-runner | 07 Sep 2005 22:11 GMT | 1 |
My 4-runner is very hard starting when cold. Other than that it runs fine. When it is warm it starts good. I cleaned the cold start injecter and when I pull off the wires and hook up power, it klicks and opens. Any sugestions?
|
| stalling 87 22r pickup | 07 Sep 2005 19:01 GMT | 2 |
My 87 4x4 truck has recently started stalling, usually during long inclines. If I back off the gas it will recover, but sometimes I have to pull off the road let it idle for a while then start off again. When it stalls there's a lot of jerking back and forth. Again, it idles fine,
|
| 1987 Toyota 4x4 Pickup 22RE | 07 Sep 2005 15:01 GMT | 3 |
The #2 and #3 cylinders are not firing and the plugs are wet. Both went at the same time and not sure what was the problem. Had a bit of valve tap before it happened. I have changed the plug wires, and checked for spark. There is spark at all cylinders .
|
| 1988 Toyota 4x4 Reg Cab -- Seat replacement or recover | 07 Sep 2005 06:04 GMT | 2 |
Has anyone had any luck in finding a re-upholstery kit for any of the older Toyota Trucks. Don't want seat covers. Would like to redo padding and re-cover. Optionally replace the bench, with buckets. Not sure what seats would fit?
|
| Inverter broke accessory socket, please help | 07 Sep 2005 05:34 GMT | 2 |
I plugged an inverter into my accessory socket, and it blew a fuse in my truck. I replaced the truck fuse but now the accessory socket still doesn't work (I've tried plugging in other items that I know work). Any ideas? Are there any other fuses or relays that it might have ...
|
| late model pu | 05 Sep 2005 23:01 GMT | 1 |
I want to purchase a late model pu that is good on gas and dependable. I have found several models of toyota sr series for sale.leaning towards a 4x4
|
| Tips and questions on my new 05 Tacoma--HELP | 05 Sep 2005 21:20 GMT | 2 |
Hi guys, I love my new '05 Tacoma dblcab 4WD long bed pickup. Here are some tips. I spent 8 bucks at the hardware store for a roll of 2" wide non-slip black tread tape and trimmed out all four pieces for door sill protection. Much cheaper than prefab accessories. Got fog light ...
|
| 1985 SR5 22RE Pickup | 05 Sep 2005 18:08 GMT | 7 |
Hi; I just passed California's "Test Only" Smog test with lots of margin. The following week I broke a valve spring. Three years ago I had a short block done, nothing to the valves as far as I know. The engine has been
|
| 03 4Runner Maint Light Code | 05 Sep 2005 05:50 GMT | 3 |
Can someone please tell me the code for turning off the maintenance light on a 2--3 4Runner? I know it has to do with the odometers, but don't know the combo. Thanks
|
| Body repair parts & how-to for a 1990 4Runner | 03 Sep 2005 16:58 GMT | 4 |
Any recommendations as to where to buy body repair parts for a 1990 4Runner? The vehicle has the typical wheel well rust, as well as some small holes in the doors, bumpers, and corners. I figure that it would be best to just replace the bumpers. I assume that we're talking about ...
|
| hybrid engine in 4runners | 02 Sep 2005 23:19 GMT | 4 |
anyone know when the hybrid engines are going to be put in the 4runners? I looked at the highlander last week, it was nice, but the cargo area is too small for my dogs, and, I couldn't carry nearly as much in there as I can in my 96 4 runner
|