A while back I had asked a question regarding a problem with the tranny
in my 2005 Taco, V6 6 speed. The issue was that the tranny was coming
out of 4th gear and dropping into neutral. I few others responded that
they were having the same issue. Well, the truck went into the shop

My "88" 4X4 Truck 22RE has a blown head gasket, water sucking into
#3. Losing water, steam coming out tail pipe, #3 spark plug fouling bad
(although #3 still seems to have good compression), rocker arm cover
coated with brown milk. 170K, 40K on rebuilt long block and timing set,

I have a 1990 Toyota truck, you know the one with no apparent name!
3.0l 4x2 5 Speed
Recently the shift knob will jump out of first when you let the clutch
out.

The horn on my truck does not work, no big deal until safety inspection. I
checked power going to the horn, 2 wires both hot with out activating the
horn.Bought a new horn still does not work. I'm lost

Looking for two new or good shape bucket seats for a 91 toyota pick up, 4x4,
x-tra cab.
Does anyone have an idea where I could get them?

I am changing the timing belt on a 94 4'runner with the 3.o liter v6
engine. Is the crank shaft pulley bolt right hand or left hand thread?  I
have tried just about everything to get it loose...... any suggestions?

1993 Toy 2wd 22re 5sp 210,000 mi.
Suddenly I have no fast idle when cold. Any ideas what to look for?
I'd like to know how the fast idle system works. I assume there is a
heat operated vacuum valve that opens a diaphragm to let more air into

I have a 99 Toyota 4 runner. Acouple weeks ago after filling up the gas
tank the guage registered empty.  It did that on the next fill up. The
last fill up the guage stayed at full and then went down to half a tank
where I ran out of gas.  Is the problem with the sending unit or the ...

I've spent the better part of today reading post across the internet trying
to match my symtoms with others, but to no avail...
Last night while driving I came to a stop put on my left turn signal, it
made one one audible click and froze on.  I contined to make the turn and

    I was rear ended by a drunk driver Christmas Eve. I'm still
waiting for the official word but several people from the cop to the
tow driver have told me it's totaled. It's an '04 Tacoma 4x4 Extracab
TRD, 6 cyl, auto, with less than 10,000 miles on it. It didn't have a

I have a 91 extened cab pickup.  My turn signals stopped working.  The
hazzard flashers work and the lights blink, as well as the brake light
and parking lights.
When I push down or up....nothing.  All lights are on and it doesn't

    I am about ready to change oil on my new 2005 Highlander V-6 for the
first time and I am wondering if I need to remove the "belly pan" to get to
the oil filter?  I can feel the filter and see it OK but this plastic belly
pan seems to be a tedious task to remove.  I don't think ...

I'm going to be removing the front brake rotors on a '99 Tacoma 4x4 pickup
truck in a couple of day. Are there any "special" tools I'll need, or any
"tricks" that I should know of before I get into this project? All the
rotors I've removed in the past have been pretty straight ...