| Thread | Last Post | Replies |
|
| '06 Tundra - noises | 03 Apr 2006 02:13 GMT | 1 |
I have an 06 Tundra that is making some strange noises. I have done some reading through archives of various groups and have come up with the following "known" issues from past years: - ABS reset sound
|
| Bad electrical screw-up on 89 PU | 03 Apr 2006 00:46 GMT | 2 |
As we all know, electrical problems really suck, and I don't know how bad this one is yet. Background story: I plugged a jingus Chinese made cell phone adapter into my cigarette lighter but the LED didn't indicate power. A few moments later
|
| knock sensor | 02 Apr 2006 22:47 GMT | 1 |
Can anyone tell me if a '91 4runner V6 with a bad knock sensor is running "closed loop" or "open loop"?
|
| Oil Foam | 02 Apr 2006 21:55 GMT | 7 |
This may be a stupid questions but I have a smal amount of foam inside the oil cap on my 2005 Toyota Tundra. Is this normal? The truck is running great but when I had the oil changed I was told it could be a problem.
|
| water pump question | 02 Apr 2006 17:45 GMT | 2 |
I have a 95 4runner, V6 3VZE 3.0, I am doing the head gasket fix, I have it all apart and I am wondering about the water pump. There is a little bit of residue on the lower end of the block. I wiped off the area and it doesn't seem to be coming from the water pump. Should I ...
|
| 2000 Tundra Dash Light | 02 Apr 2006 12:50 GMT | 2 |
The little green light in the dash for D (drive) is burnt out. How much of a job is it to replace? I can barely get my bear paws behind there. Bubba
|
| 2005 Tundra-Starting trouble | 01 Apr 2006 11:48 GMT | 8 |
I have a 2005 Tundra Access Cab with just over 10,000 miles on it. I use good quality 87 Octane fuel, as the owner's manual states and take good care of it, all maintenance performed regularly, garage kept, etc. Several times in the past month, I've tuned the key to start it ...
|
| Thanks Scotty and Bubba for info re 1998 4runner clock problem | 01 Apr 2006 06:47 GMT | 1 |
Yeah! I got my clock out from behind my panel. It really was easy with your info Scotty. I had to remove 4 panels in the following order (in case anyone else has to get behind the dash panel) - 1. the panel covering my e brake - lift the centre console cover first
|