Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Toyota / Toyota Trucks / July 2006

Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
'88 Toyota Pick-Up Questions15 Jul 2006 00:16 GMT7
Two questions: I need to a new e-brake cable (snapped close to the pull
thingy), new front calipers, new front brake pads / shims / rotors /
repack wheel bearings, free up the pivots (?), and I think I need to
replace the brakes in the back, as well.  Having never done a lick of
Is the idle speed of 89 V6 (3VZ-E) adjustable?14 Jul 2006 10:02 GMT3
My Chilton manual says "The idle speed on the fuel injected engines
is electronically controlled by the Engine Control Module (ECM)
computer. The Idle Speed Control (ISC) system electronically oversees
the proper idle speed for all operating conditions. This is a good
Radiator leak? 14 Jul 2006 09:40 GMT16
Recently, while checking the oil and fluids on my '94 4Runner (V6), I
noticed a few drops of coolant had seeped out the top of the radiator.
I wiped off the coolant, and noticed that the black metal was now
brass looking, like the coolant had removed the paint.   I had seen
Bastards messed up my Tundra!13 Jul 2006 18:57 GMT57
Some a.shole crankhead broke the passenger window of my brand new Tundra
last night and pried open the locked glove box.  In the process, the paint
on the door got scratched and the dash right at the top of the glove box has
a couple small pry marks.  Son of a BITCH!  The truck has ...
clunk13 Jul 2006 18:13 GMT3
When going over speed bumps at an angle or while turning on top of
them, I get a mild clunk on one side or the other up front.  At first I
heard it when going straight over the speed bumps and thout it might be
the splined portion of the drive shaft (that comes out of the manual
1995 4Runner13 Jul 2006 16:53 GMT8
Hey guys,
I am looking to purchase a 1995 4runner, and was wondering about the timing
belt. )Drat, I thought only Honda's had that issue).  
I have had a couple of the Toyota Vans, and loved the reliablity. However,
Help with 3VZE13 Jul 2006 16:12 GMT9
I was going to change my Timing belt next week while I was on holidays since
it has 103,000 km (64,000 miles) on the belt.  The engine has 400,000 km
(250,000 miles) on it.  I guess I waited to long.  I pulled out to pass
someone on the highway and the timing belt blew.  I got it ...
Check motor light13 Jul 2006 16:02 GMT11
My vacation starts Monday and this morning the damn check
motor light comes on.
The owners manual says take to Toyota dealer but doesn't say
urgent.
Power antenna replacement on 99 Tacoma, Help please..13 Jul 2006 15:41 GMT2
I have a 99 Tacoma Limited which means it came with a power antenna from the
factory. Well it finally gave out so I ordered one off of Ebay trying to
avoid the 140.00 the dealer wanted. My question is it has 3 wires a ground
and then 2 that connect to the radio. The manual shows ...
My first 4Runner13 Jul 2006 14:59 GMT4
Hey Everyone,
I've driven nothing but Toyotas for the last 25 years and finally
decided to trade in the old corolla, which had 200K miles on it. I
decided to splurge and picked up a mint 2001 sr5 4Runner, gas prices be
1995 toyota 4 runner vacumm problem.12 Jul 2006 07:44 GMT3
I just had a recent head job done, due to car overheated and blew my
heads, The car is working, but its idling kind of rough and is also my
my check engine light is comming on. I had a friend of mine check it
with the diagnostic computer and its is giving me a 71 code. Its
mechanic in South Bay, CA12 Jul 2006 01:44 GMT2
Hi, I need to get the starter replaced in my '98 Tacoma. Anyone know of
a decent, reasonable mechanic in the Bay Area? Perferably in the Santa
Clara, Sunnyvale, Mountain View area. Thanks.... (alternatively, how
difficult is it to do it one's self?)
22r rebuild11 Jul 2006 18:39 GMT1
I am planning a stroker motor on a 22r. Somebody handed it to me. Not
the motors I normally rebuild,but help me out . What is the lenght of a
stock 22r rod. How do you adjust your deck height on these motors, is
it all in the head gasket thickness.
Loose tie straps10 Jul 2006 22:06 GMT3
Here's just a reminder out there to all you people who have ever strapped
something onto your Toyota.
TIE  UP THE LOOSE ENDS OF YOU STRAPS
The idiot I am I took out my canoe this weekend,  Used a ratchet strap on
For those whose A/C only works on hi10 Jul 2006 17:08 GMT10
This is a common fix I suppose, but I was just given some great advice
here in another matter, and wanted to give something back.
My A/C was only working on the highest speed so I figured I'd need a new
motor.  Turns out all I needed was a new blower resistor. My truck is a
Pages: 1 2 3 4 5 6 June, 2006
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.