I have a 1989 Toyota X-Tra Cab, with a 6 cylinder and automatic transmission
with the shifter on the steering column.  It is stuck in "Park."  I can
start the truck fine, I put my foot on the brake and the shifter will not
budge.  I can't even pull it back, it's just completely ...

Does it make sense that I would have a gas leak from a vacuum line on
the manifold?
I knocked one loose when working on my 92 3.0l V6.  I then had a gas
leak I could not find.  I reconnected the vacuum line and the gas leak

only 120k!!...  second owner... loaded with everything even the
dashboard level contraption.
Typical midwest rust....bad power tailgate window
If it is nort good group policy to post FS, I'm sorry. My son really

Second topic of the day - I went to install my superspring tonight and
the tailpipe (on the left side of the truck) exits between the frame
and the leaf spring - is this correct and does someone know of a link
where I can find a correct picture of a tailpipe exit from a Toyota

Read this message until the end, and you will find out how the money flows in easy !!!!.
Follow the steps and it WILL work. Trust me !!!!!.
It's NOT illegal and it is NOT a scam !!!!!.
PROVEN ON OPRAH!  Reported in the Wall Street Journal!!!!

I am getting  OBD I code number 25 on my 92 V6 4x4. I was about to take
it in, but got the code to disappear by 1) changing out my dirty air
filter; 2) removing and reconnecting the plug wires at both ends; 3)
redoing the battery to frame ground ( it was broken); 4) cleaning the

Where is Toyota's Diesel engine???????

it just makes one click when i turn the ignition. i replaces the starter,
because thats what the dealership said, no joy.
please help!!

Group:
My brother has an '03 Tundra he drives when he is off work. Sometimes sits
for a week or two. After sitting for lonmg perioods the battery is dead...
He's had it back to the dealership several times and they ahve replaced the

I posted about the pinion seal and now I have doubts, as sudden
pressure release occours on opening filler hole. this have a spring in
it and it moves up and down on pressing on it. because mine seems
solid. I dont see any air holes.  I used anti sieze fluid and wire

To anyone that can help out, I want to upgrade my current OEM radio/cd
changer in my 2006 Tacoma to either an aftermarket product or upgrade my
current 1 disc changer to an OEM multi disc changer.  My problem is how do I
remove the factory unit from the dash?  There must be some ...

Have a 3.0l 6cyl 88 4runner sr5. wont turn over when key is turned.
checked the neutral safety switch, battery, ecu, new starter!  when i
turn the key just hear a clicking sound from over by the ecu on
passenger side kick panel. no turn over at all. dont know what to do?

I have a 97 Tacoma Ext Cab 2.7 4X4 and the driver side floor board and
carpet keeps getting wet. The floor board is rusty so this must have been
happening for a while. I can't see any apparent holes where water would be
getting in. There is also small tear (about 2") in the ...

The outlets on my Tacoma stopped working the other day. I am assuming
that it is a fuse problem, but I looked at all of the fuses in the
dash, and I don't see any that are blown. Is there another location
where the fuse for the outlets might be?

How do I connect the stock head unit from a 98 Camry to a 86 4Runner?
More precisely, where do the cables in the 4Runner connect to the wire
harness? Or how would I find out?