Hi..first post for me. I am thinking of lowering my 94 toyota pickup. it has
torsion bars on the front. if i want to lower it lets say 3", is it ok to
just crank those down. will this throw off my caster and camber as well as
my alignment. Or is a set of drop spindles the way to ...

Does anyone have the same problem as I?
When I go over bumps, I hear a clicking in the rear leaf springs.  Upon
inspection, I find nothing wrong what so ever.  I took it to Toyota,
and they told me that there is an imperfection in the spring itself,

How hard is it to install a windshield in my 1984 longbed pickup? Will it take two
persons to do it right?  Also, can I reuse the rubber seal and the molding?
I'd appreciate any suggestions and directions from someone who's done this.
jc

Well after 11 years I am ready to retire my 1990 4runner with 320 000km
. This truck has been awsome..so good that I am going to go buy another
one. If it wasnt for all the rust and the leaky front seal I would
probably keep driving it

the vin is JT4RN82P82P8KS001629 so I can tell a parts counter what the
hell I'm driving , was handed down from dad. so i have a leaking
differential and I was wondering if this is acommon toyota thing , I
have 185,000 kms. so I priced the seal and its like 8 bucks but the u

I just replaced my 1990 4Runner with a 2001 4runner Limited.
I did not get the owners manual for it.
Just had some questions?
I would like some instructions on how to program the garage door opener