| Thread | Last Post | Replies |
|
| 84 model Hilux (ln65) handbrake | 31 Oct 2006 02:34 GMT | 1 |
I'm having a bit of trouble with my handbrake at the moment. Everything seems ok with the mechanism, but it just doesn't seem to move enough to engage fully. Even by pulling on the lever at the backing plate doesn't put much pressure on the shoes.
|
| 1999 Toyota Harrier ECU/CPU problem | 30 Oct 2006 20:01 GMT | 1 |
Hi, I have a 1999 Toyota Harrier that was victim of a flood, and sustained severe water damage. In short the CPU & ECU were fried. I have had quite a difficult time finding a replacement. Any help anyone has would be great.
|
| Timing Belt question | 29 Oct 2006 23:47 GMT | 7 |
I own a 2001 SR5 Tundra 4.7 V-8 with ~100,000 miles. I know I'm at a point where the timing belt should be replaced. Having just moved to the Atlanta area I don't know a good mechanic so I'm inclined to use the dealer. They
|
| Please help with 2004 Sequoia electrical problem | 29 Oct 2006 23:19 GMT | 1 |
Symptom: The gauge fuse /15A blown almost everytime the engine is cold, fuse popped while gear changed from P to whatever. It seems OK if fuse replaced and it will run, even engine stopped and restarted after that first time! Happens
|
| New M/T tire on Tundra, air pressure light always on | 29 Oct 2006 14:28 GMT | 7 |
I installed new M/T tire on my Tundra, and now the tire air pressure light is always on. Previouslable I had H/T tire. Any suggestions? saqib
|
| installing new catalytic converter question | 29 Oct 2006 11:20 GMT | 2 |
1993 4WD stdbed, 22RE. I am replacing my exhaust system, downpipe back. And the new cat I got is a bosal 099-448: https://b2b.bosalnafta.com/products/partsimages/bos099448-1.jpg
|
| compression question on 02 2.7 | 29 Oct 2006 11:07 GMT | 1 |
# 1 is 150 #2 is 150 #3 is 130 and the 4th is 180 the motor has 130,000 on it runs well but idle is a little ruff doesn't not smoke or use oil at all i get about 19-23 mpg on it ita 4x4 an idea why the compression is like this??
|
| getting wire into cab | 28 Oct 2006 04:01 GMT | 10 |
I just bought a new Tacoma extended cab and need to get a piece of coax cable about 1/4 inch in diameter into the cab. The cable will be comming from the back side of the back side of the truck and needs to end up under the dash. Any ideas before I have to reinvent the wheel ?
|
| Price check, Tacoma | 26 Oct 2006 23:49 GMT | 3 |
With an initial price quote of $21894.00 for a 2007 model Tacoma, what can I reasonably expect to negotiate for a final price? I haven't bought a new vehicle since 1987 so I don't have a clue as to what to expect.
|
| neutral start switch | 26 Oct 2006 05:16 GMT | 1 |
94 toy truck a\t 4x4 is there another neutral start switch besides the one on the a\t and how do you check it where does it get it power from and I must even push the manul over ride to get it out of park it all seems to be dead
|
| Gas Mileage? | 26 Oct 2006 03:20 GMT | 11 |
I've been considering buying a new used truck. I have previously only purchased Fords. I am likeing the Tacoma. I am curious about the actual gas mileage and if there are areas to look out for when checking out a 2000-2004 extended cab Tacoma.
|
| 1999 4Runner 4cyl | 25 Oct 2006 07:34 GMT | 2 |
Have a 1999 4Runner with about 132000 miles on it. I have been thinking of replacing the regular oil with the synthetic kind. Any problems I should watch out for on a vehicle with this many miles? Also, can anyone describe the main benefits of using synthetic oil?
|
| Starting woes | 25 Oct 2006 02:00 GMT | 5 |
My 99 4x4 Tacoma has started a bizarre ritual. It acts as if the battery is dead, then on the 2nd or 3rd try it cranks over like usual. I am guessing starter, but wonder about ignition switch. Any high probability guesses
|
| HOW DO I GET THE FOG LIGHTS TO WORK W/O THE HEADLIGHTS BEING ON? | 24 Oct 2006 21:24 GMT | 9 |
Hey guys I have a 2005 Tundra and always wanted to get the fog lights to turn on without having to turn the headlights on. Is that possible?
|
| Idle Problem | 24 Oct 2006 06:12 GMT | 4 |
I have a 1995 2.4L Tacoma, the truck idles around 1100 cold (normal), but drops to 750 warm (seems low). The problem that I am encountering is when I engage the Air Conditioning the computer is not compensating for the added draw and the engine stalls whether it is warm or cold. ...
|