Hey All,
I have a 91 4runner 6 cyl. I've developed a knock which I believe is a
big end rod bearing. IF this is the case..does anyone know if I can
replace the bearing through the bottom, instead of removing the head

The nylon tail of the antenna mast of my 97 4runner broke.  I have to
get the broken piece out of the motor.  I can't get the fender liner
out of the way because the fender flare is in the way.  How do I remove
the fender flare?  Is it a bad idea to try? Any advice is welcome.

 I have a 92 pickup truck with new engine swap by a sketchy mechanic
recently.  After going to pass the emissions tests and failing, my
financial situation requires me to make this thing pass myself.
The truch failed the Hydrocarbons HC test fairly badly 6.5/6, and it

Hey folks, is the performance exhaust offer by Toyota a real dual set up?
Meaning is it a dual cat to dual muffler dual pipes?
Or is it a single cat to single muffler dual pipes?
Any real power/torque gain from it?

I have a Toyota T100 with around 140K. Lately I have been having trouble
starting the engine when it is warm. It will start right up when it has sat
in the garage all night, but run it, shut it off and try to re-start.. Thats
when the fun begins. I have to pump the gas pedal quickly ...

I have an 03 Tacoma XtraCab, 2.7L.  I keep track of mileage religiously. The
past 3-4 tanks I have dropped about 4MPG. I have not changed my driving
habits at all. Although it has cooled off here recently in eastern
Newfoundland, past years I would not notice such a drop in ...