Hello I drive a 93 toyota pickup with a 22re in it. I was wondering
would cause the antifreeze to overflow out of my raideator when my
pickup is warming up?  Once my pickup is warm this stops. This causes
my water level to drop and my engine will rev up and down untill it

I have a 1993 Toyota 4x4 v6 with approx 225,000 miles.  I replaced all
of the pads about 3 months ago and have had no problems.  However, this
morning the dashboard brake light came on and stayed on.  I checked the
fluid level and it it fine.  The brakes seem fine.

I have had an ongoing query on what is the proper idle RPM . Once the
engine has properly
warmed up, it will idle at approx. 7-800  +/- .  the reason I ask is it
seems that every time I

Happened across a reference online to this product this morning. Sounds good
( most things do walking in the door ), but I'm wondering if it is actually
worth considering on either a new or used vehicle.
Anyone have any direct or indirect knowledge of it?

After using a portable air pump to air up my tires the cigarette
lighter doesn't work anymore. I've check the fuse box near the drivers
door and all the fuses look OK. Everything else works just fine.
Is there a fusible link for the cigarette lighter or another fuse box

Navy blue with blue interior.  Motor runs beautifully. Timing belts done
recently.  SR5 model with v6 automatic.  Air conditioning works as well.
Truck doesnt want to move anymore.  Located in Florida with no rust.
You can email me at porshapower@webtv.net   :)

My 2003 4Runner makes this groaning sound when coming to a stop.  It
starts to happen when I'm almost to a complete stop and goes on until
I've stopped completely.  It almost sounds like wet or muddy bicycle
brakes.  I've checked the pads and they've got pleanty of meat on them

I have a 2002 4 Runner 2WD. The other day I started it up and the thing
started and idled fine but when I tried to accelerate I had to mash the
gas about half to three quarters before anything would happen. It will
drive but it wont shift until about 4000 rpm and then you have to

I have a 1984 pickup 4x4 - to remove the tank does the bed of the truck
need to be removed or does the tank drop straight down after the
vent/filler tubes and side bolts are removed  ?