I've got a '94 pickup with a 22-RE that has a flat spot in throttle
response about 2000-2200 rpm. It's been there since I bought the
truck (107k, now 185k) but it's been getting worse lately. It's most
noticable when the engine is transitioning from cold start to warmed

I have a 98 Tacoma 4X4 , V6 SR-5  that has started to vibrate under load. It
don't matter what gear I'm in or speed. When I step on the accelerator to
get up to speed I get  vibrations.  If I'm cursing along at speed and even a
little bit of pressure on the accelerator, I have ...

Just bought an 07 Tacoma V6 prerunner double cab.  Bought it sight
unseen came from dealer in another area out of regional stock.  Came
with a Borla exhaust system.  
Salesman was not very clear on what a borla system was told me it was

I think that I'm having an intermittent spark problem with my 1986
Toyota pickup (4x2, 22R).  The engine sounds and feels like it is
running on three cylinders under load.  It doesn't happen all the time
(but very frequently) and only after the truck is warmed up for a

I just bought a new 2007 Tacoma Access cab.  Much to my chagrin, I
discovered that it doesn't have either a cable-operated gas filler door or a
locking gas cap.  I'm thinking of trying to put a lock on the filler door
since I can't find any locking gas cap that would maintain the ...

I have a 04 4wd tundra, I just started to do maintenance myself. I
want to lube the things that need lubricating, but have no clue where
the fittings are. the owners manual doesn't illustrate

I have a 1990 Toyota Pickup. It's been a great truck. In normal
driveing the truck has always had a studder while going down the road
at a steady speed. First start of the day, the truck takes a min to
reach full low idle (have to press peddle to get the low idle most the

I live in a state that requires a front tag.  I bought a Tacoma last
week.  I understand that the general practice is to attach the front
plate to the bumper by driving two self-tapping screws through my
beautiful, new, virgin bumper.  The plate then eats into the paint and

My 2001 Tacoma currently has 88,000 miles on it.  What is the current
thought regarding when to have the timing belt replaced?   What else is
it good to do at the same time, while the engine is apart?
Frank

I'm trying to pull the shifter on my low-end pickup, but it looks like
I have to pull up the original vinyl flooring to get to the 4 screws
holding the rubber shifter boot.  The shifter boot sits directly on
top of the vinyl.  Do I need to take out the bench seats, jambs (not

I recently bought a '98 Tacoma 2.4L with about 80K miles. No major
problems showing, but I'm trying to get my act together regarding
normal maintenance. The owner's manual maintenance sked looks pretty
normal, except I cannot find any recommended interval for replacing

Looking to buy a second 4x4 pickup while my 86 is under serious
restoration. Anybody know the last year Toyota built a pickup with
chrome bumpers and without any plastic hanging on the sides.
And, If you know - motor and trans options.

Anyone ever heard anything about the timing chain causing a ticking sound? I
have a brand new dbl cab 4x SR5 and the noise drives me crazy. I brought it
back to the dealer and they said it was the timing chain and something to do
with when it's cold (I live in the northwest), and ...

Anyone know where I could download a diagram and information on the carb on
a 90 model toyota truck?
Also a good source for parts?
Charles

I have a four pin connection on my 2002 Tundra to a trailer.(3 male
and one female pins)
My trailer is a boat trailer with its own braking system (hydraulic
and electrical.)  Does anybody know how I can convert my connection