Group: I have a '99 Tacoma and it has a tonneau cover that I want to use. I
also want to put tool box in the bed. I've looked for low profile boxes that
would mount in the front of the bed. Problem here is the tonneau cover will
have to be rolled completely back to access the ...

I recently changed the bace gasket on my carb. and since I have done this
the thing blows white smoke with a touch of blue. I have rebuilt the carb,
got a new adapter plate, checked compression, changed plugs and wires, put
a dif gasket in, checked timing, I can't find a vacume leak ...

This truck has been sitting for about 9 years not started or driven. I have
it running some it usually takes me pouring gas in caraburetor to get it
running but then it will run if you keep gas peddle in about half way I
did get it to run and drive it just a short distance. Will not ...

Hello there, I have a 1985 Toy xtracab and i am finding lately that
when i go to back up, it feels like something may be binding as i
stall the truck sometimes and it just feels like im dragging
something. It shifts wondefully in all forward gears.

Hello there everyone. I have a 1985 Toyota 4x4 xtracab with the 22RE
motor. Years ago, i found a site with a great how to on making a
snorkel for it using black PVC pipe. I really would like to do this
now, but cant find the site anymore, as i lost my bookmarks and im not

I have had the valves adjusted four times in the last year and it just
won't stick.  I am told that I need to replace an adjusting screw.  My
question is: Does the head need to be removed to replace the screw, or
can the screw be replaced simply by removing the rocker arm cover?

Family member has subject truck and xmission fluid has never been changed,
now at 97K.
Before I offer to help with new fluid I need to have the following
answered,please:

I have a 2000 Toyota Tacoma TRD 3.4 liter with california emissions
and 114,500 mile.P0420  catalyst efficiency below threshold (bank1)
came up on OBDII scanner. My gas mileage seemed to have dropped about
3-4 miles per gallon since check engine light came on. I replaced the

Do it or not?
Right way vs. Wrong way?
Experiences, opinions, suggestions welcome.
Truck in question is a

Hi i have a 1987 toyota 4 wheel drive with 187,000 miles. I recently
had a new carb put on it. The truck has started to make a popping
sound when i put the clutch in to slow down. I need some help so i no
wear to look i dont want to start puting a load of new parts.Is this

Wall St Journal - May 1, 2007
..Sales of Ford cars and light trucks...fell by 8% last year and are
down by 15% for the first three months of this year. Ford brand sales
in 2006 were one million vehicles behind the brand's sales in 2000.

I bought a rebuilt 5 speed manual transmission for my 92 toyota one ton but
it turned out I did't need it.The problem was a small part in the shift
mechanism. I'd like to sell the tranny on ebay. I've never shipped anything
that large, advice? mr_ed@isp.com.

it's a matter of quality. My 95 escort just dropped another valve, a problem
ford has known about for years and didn't fix.Motor's been down twice in 6
months plus a host of other problems from fuel pump to speedometer and dash
instruments. One window won't roll up etc. My toyota ...

I have a '92 toy pu, with 22re engine.
I have almost 300,000 miles.
When does the timing chain need to be replaced?
and is there any warning?

Randomly, shortly after I crank my truck ('86, 2WD), I hear something that
sounds like a honking noise about the same pitch as a donkey's bray.
It doesn't last but maybe 10 seconds, so I never have time to jump out, pop
the hood, and see where it is coming from. And it doesn't do ...