Hi guys more problems
When i drive my yoda and slow down and push in the clutch and change
gears you can hear a slight popping sound any ideas.
I dont want to spend alot of this truck as i use it for work it is a

My check engine light in my pickup has never worked.  I never really
cared until today because I just found out it is an automatic fail for
emmisions testing in CA.  I checked the bulb and it works fine.  The
truck has over 200,000 on the odometer, but only about 30,000 on the

I just got a 90 4runner with the 3.0 V6, 187000 miles on it for a good
price, ( 500 under blue book )  what problems are most commonly wrong
with this series of trucks.  What should I look for and more
importantly how to I spearhead them before they are major.  Thank you

I have a 2000 Tacoma 4WD, S5 with ~89k on it.  I understand that the
timing belt should be changed at the 90k servicing.  I have also seen a
few posts on this ng where folks have removed the timing belt at 95k and
they remark that it still looks new.

What kind of Vent Visors are best?  There are several brands, some
with 3M adhesive tape application and others install "in channel."  I
have a Tundra 2006 SR5 extended cab with short bed.  Since the back
side windows open from the side, I guess visors don't make sense

Hi i need to replace my belts on my 87 yoda. My ac does not work so i
can leave off that belt. Can someone tell me how to remove them. Any
picture help would be greatt
Thansk mark

My '96 T100 2WD just started making a roaring noise that comes from the
front end - passenger side.  Thinking it might be the tires I had them
rotated and balanced but the noised stayed..  Wheel bearings?  Is this
something a DIYer can do or should I be calling garages?  The ...

I have a 2006 Toyota Tundra SR5 extended cab short bed.   Apparantly,
there have been two chassis to Tundras in 2006.  I looked at the
stickers on the driver door side, but that just tells about tires.
Where do I look to find the chassis model?  I need this to buy 3rd

most toyota filters I have used contain a magnet to trap loose metal
particles and some also have an "anti siphon" feature to keep oil in
the horizontal mounted filters

i know a bit about this alredy and know it is some times "hot butin"
but how can i tell what parts i will need and what i wont. ie the hole
head or just the manifold, new cam or not? and is it realy nesisary
for all of the ecu's sencers to be conected?

Hey Folks,
Looking for info on the best year / motor to get in the 2-wheel drive
extended. cab truck. My plan is to get an early 90's or late 80's and
rebuild it if I have to and keep for a long time. Plan to have a small

my transmision is mesed up i had it out and apart to the point of the
reduction gear. (no gears were removed). for other resons but when i
put it back in it is stuck in revers even though the shifter is in the
newtral position. what could be rong? it is an 1984 G52 4x4

Autoblog http://tinyurl.com/25z5vf
About a month ago, we told you about the all-new Toyota Tundra's
stunning four-star NHTSA crash test score, which was lower than the
five stars received by the F-150 and Silverado. Toyota seemed as

Hello there, I have a 85 toy 4x4 extracab an i am getting a shimmy sometimes with it. It
doesnt matter so much what speed it is, it will suddenly start wobbling like the wheels
are shaking. I have had the wheels balanced, and checked bearings etc and balljoints
and all was good. ...

I am currently facing a problem with my passenger side window on my
1982 toyota pickup. It will roll down about 2",then it will continue
to roll, but the window won't move. If you push it down, it goes down,
but gets hung up because it goes kind of sideways. It still seems to