| Thread | Last Post | Replies |
|
| Wiper Problem | 27 Feb 2008 19:58 GMT | 5 |
My truck is an '85 SR5 Extra Cab with the 22RE and 5speed manual tranny and RWD. My windshield wipers work on low speed and intermittent but not on high speed.
|
| Bad vibration durign idle speed. | 27 Feb 2008 03:00 GMT | 4 |
My 1999 Toyota Tacoma vibrates badly during idle speed. I've taken it to a few mechanics and they were unable to fix the problem. One mechanic suggested changing the engine mounts. This fix didn't change the vibration. The truck only gets the vibration after the car is
|
| Hot Sale~Selling HID Conversion Kit @ www.bvstatio n.com | 22 Feb 2008 19:28 GMT | 1 |
We are selling HID CONVERSION KIT , Ballast and the related product, please come to our website and check it out!!! Our business is your business!! WWW.BVSTATION.COM
|
| Toyota tacoma | 21 Feb 2008 23:10 GMT | 1 |
Just bought a 2008 2wd 4cyl tacoma extended cab Can't find fender flares to fit is it cuz it s so new? I also want to put larger tires on it 75/15 or even up to a 16 is that advisable?
|
| 2008 Tacoma | 19 Feb 2008 21:26 GMT | 5 |
Just checked the toyota Web page on the 08 Tacoma. MPG estimates are listed as 20/25 for 4 cyl. 5 speed. Does anyone know if something has changed to drop the estimates from the 23/28 listed for the 07? Got my 07 Access Cab, 4 cyl, 5 spd, a few months ago. If I drive 65 it has
|
| 2008 Tacoma 4cyl | 19 Feb 2008 06:48 GMT | 14 |
I just bought a 2008 Tacoma 4cyl 4a. I'm pleased with the truck. Sitting at idle, the engine is so smooth and quiet that I have to concentrate to detect whether it's running. I owned an old 92 Pickup for 15 years, and the 22R-E engine was not
|
| AC question? | 18 Feb 2008 20:28 GMT | 24 |
I just bought a 1983 toyota truck.(the other 83 toyota truck needed a new engine and transmission so it's being use for parts now) And it has all the stuff for ac inside the cab. But sometime in it's life someone removed all the stuff for the ac under the hood.Now here is my
|
| 2000 Tundra trailer wiring | 17 Feb 2008 02:02 GMT | 3 |
Just bought a 2000 Tundra and would like to wire it for trailer lights and brake controler. Does anyone have experience with doing this? There is a wiring connector up inside the bumper that looks like it might be pre-wired for a kit to plug
|
| timing belt on 2000 tundra | 16 Feb 2008 23:01 GMT | 3 |
Recently traded for a 2000 Tundra with 118000 miles on it. It has the 4.7 V8 engine AT. I do not know the history on the vehicle, but it runs good and seems to be in good shape.
|
| Sea Foam engine decarbonizer instructions? | 13 Feb 2008 17:45 GMT | 3 |
Finally Sea Foam engine decarbonizer products are available in Canada through Carquest and UAP/NAPA auto parts stores.Well I pickup up two cans of Sea Foam engine engine treatment (473 ml) part # SF16 C=$12+tx each and one can of Sea Foam Deep Creep (340g) part # DC14 C=$13+tx
|
| 2008 prerunner oil change | 13 Feb 2008 05:01 GMT | 5 |
How often do I change oil and what kind in a: 2008, Tacoma, Prerunner, 6 cyl. 6 speed manual, 2 wheel drive? Any opinions would be appreciated.
|
| 2002 Tacoma 4x4 Clutch problems | 12 Feb 2008 21:14 GMT | 6 |
I recently acquired a 2002 4X4 Tacoma with 74K miles (5 speed) whenever I put it into 1st and start out unless I ease the clutch out extremely slow and apply the exact amount of pressure to the accelerator the truck jerks, same thing happens when I shift into
|
| '06 Tundra V8 - oil foaming? | 11 Feb 2008 12:09 GMT | 9 |
Has anyone else noticed a foaming buildup on the underside of the oil filler cap on the 4.7L Tundra V8? I do regular oil changes at 3 months or 3000 miles. but notice this seems to happen on a regular basis. The level and appearance of the oil seem fine and its not burning oil ...
|
| RAV4--no more manual transmissions? | 09 Feb 2008 18:08 GMT | 32 |
I'm contemplating buying another RAV4 (I've had 3 in a row, and I love them!), but after looking around online it appears they're no longer made with manual transmissions. Can anyone confirm this? Since I HATE...loathe...despise...automatics, if that's all there is, I'll have
|
| Lower control arm bolts | 09 Feb 2008 03:08 GMT | 1 |
I have an '87 4X4 Pickup that seems to have lost one of the cam bolts on the lower control arm. The bushing seems fine from what I can see, although a little too offset to simply slide a new bolt in there. The manual that I have says that I need to torque the replacement bolt to
|