Looking for a Dodge Dakota? Check out this auction site with only Dodge
Dakotas and accessories. All bids can be made through this webpage directly
to E-Bay. www.shawassociates.net/dodge.htm
Check it out! It's all Dodge, all the time!

Too bad Borla no longer makes stainless steel exhaust systems for the
1984-95 Toyota 4-Runner/pickups.Does anyone know if the exhaust
systems manufacturer ANSA:
http://www.ansaautomotive.com

Here is an updated list of free Toyota FSM's:
Any Public Library in your area would have the Factory service manual,
Haynes,Chiltons,Mitchells,Clymers, Bentley and Toyota repair books.For
the Dartmouth/Halifax area:

Curious...

Hey folks,  The power mast on my 96 4runner is toast,  stays up all
the time, can hear the electric motor running just fine when it should
be lowered.  I need a new mast.    I looked around on-line and have
found a number of places that sell replacements for 50 bucks or so.

New Tacoma Owner here
Kinda long Post, sorry
Well I did it.
Went out today and traded my 4 year old gmc in on a Tacoma.

The brakes will "grab" at low speed stops, like when rolling to a stop sign
or intersection. When it happens, the right rear wheel brake will lock. It
will release with no effort if I reverse the truck, but trying to pull
forward in drive requires a lot of throttle. Any thoughts?

My son wants a small pickup with a lot better gas mileage than his Ford
Explorer. Are Toyota trucks the best choice for mileage?

Does anybody know where this buzzer is on a '95 Toyota 4Runner? I've read
multiple service manuals and none of them match my truck!? I'd like to
disable the buzzer without disconnecting the door switch (so the light will
still come on when the door is open).

I've got a 93' 4Runner SR5 4wd.  One of lug stud on the rear axle is
stripped.  How hard is it to replace?  Does anyone have links on how to take
out the wheel assembly?  I have access to a hydraulic press to remove and
replace the new stud.

I have just changed my oil and filter on 08 Tacoma, 6 cyl. 6 speed, 2 wheel
drive.  How do I turn off the maintenance required light?   Thanks in
advance...........

I have an 05 tundra 4x4 crew cab, 4.7 auto  92K miles,  and on
ocassion the transmision is difficult to shift into 2 or 3. not that
the tranny doesent go there and work fine, just like its real stiff.
Felt it first last winter and since once it gets warmed up it would go

thinking about an 08 tacoma v6 4x4 trd rugged package.
pros??
cons?
I am a die hard GM fan BUT thats fading fast, and lord forgive me for

I noticed many aftermarket manufacturers (including Toyota
dealerships) when selling clutch kits (clutch disc,pressure plate and
throw out/release bearings) usually charge $30+ for their throw out/
release bearings when you could purchase the exact generic bearing

What is the level of difficulty?  Are there special tools needed?  I've
offered to help out a friend with a '94 V-6 with a suspected blown head
gasket.  I've never tackled a V-6 Toy.  I've built several small block and
straight six Chevy's, a couple of OHC 4 cylinder Fords and ...