The drivers belt pin will not go into the socket unless you
are holding down the release button.  Feels like it is
hitting an obstruction.  I suppose that some internal spring
is probably broken.  Is there a way to repair or replace

Florida, MA that is. Thre inches of snow this evening.
It isn't real often we get snow around here before Halloween.
Global Warming my @ss!  ;)

I bought an 88 Camry and have replaced half the car (it seems!) So far
have replaced CV boots, tie rod ends, exhaust, plugs, wires, cap,
rotor,fuel filter, etc. We finally had it running pretty good when it
just died (while driving.) It cranked fine but wouldn't turn over. No

There is a website that pays you to have it running! i just signed up,
no credit card required, and they send checks to my house for keeping
the page open in another window!
you can do it too! just sign up at this address

Another good one for Nathalie.

The Rav 4 is getting a redesign overhaul for 2006.  When can we expect
changes on the highlander?
JCPZero

Is it possible to run a MSD distributor on a 20R series engine?
Or maybe use the original distributor? Can the stock distributor take the
amount of punishment a MSD box delivers?

OK, now i thought i was fairly good with brake issues, but this one has
me stumped.
Always had lots of pedal travel - could always stop but it felt a
little spongey - bled the system twice with no luck. Pedal always feels

http://www.sltrib.com/nationworld/ci_3143922

Nathalie, you should like this one:
A woman was having a daytime affair while her husband was at work. One wet
and lusty day she was in bed with her boyfriend when, to her horror, she
heard her husband's car pull into the driveway.

The rear windows in my corolla work intermittently.  When I lower them they
only come up a few minutes then stop.  If I wait a minute they will come up
a few more inches, wait and repeat until closed.  The driver's window which
gets the most use and should wear out first, works ...

How can I determine the engine size on my 1995 Corolla Wagon
(I think two were offered).
I bought it used, and there doesn't seem to be any stickers
or marks on the engine that tell me what size it is.

Some of the benefits of run flats. Really cool video:
http://www.bmwusa.com/bmwexperience/BmwInD...fety.htm?id=189

Anybody with experience care to comment on troubleshooting
looseness in the steering and suspension joints and
connections in the front end of a 1988 Toyota pickup?
When I asked the folks at the tire store to do an alignment