I have a 1995 toyota carina e , engin type 4A-FE. I need to change the
engin bush. Can i do it myself by supporting the engin with a jack and
undo those bolts from the engin bush arm (3bolts) and then the middle
bolt from the bush and push the round rubber bush out and replace it?

During the critial years from 1994 to 2000, Bill Clinton made 'deals' with
them instead of curbing their nuclear appetite.  Now we've got another
'nuclear power' in the Pacific Rim.
Just remember: Bill Clinton's friend are:

Greetings Brains Trust
Have a question regarding the above mentioned machine that is equipped with
a 5 speed manual.
It was hesitating under load (2, 3 and 4th gears), ok in 1st and top.

An engineer from work took my Celica GTS today.
Of course, after a YEAR of trying to get rid of it here, someone from
ScionLife offered to BUY it, but I told Randy two weeks ago he could have
it if he came and got it!

Hey all I recently purchased a 1989 Celica w/ auto air sunroof, for 200
bucks american. It has 165k miles on it. It runs fantastic and gets
exceptional hiway gas milage. So far I have replaced the front struts, the
altenator, and rebuilt the passanger rear brake cylinder. My ...

Does anyone know if there is usually a charge associated if a dealer
trades cars from one region to another?
I am interested in a 2007 Limited 2WD I4 .. but I am not intersted in the:
- JBL® AM/FM 6-disc in-dash CD changer with satellite radio capability

I WAS JUST CURIOUS ABOUT THE EXHAUST MANIFOLD WHEN IT WAS
INSTALLED.....DOES IT HAVE TO USE A GASKET SEALANT IN BETWEEN THE GASKET
OF THE MANIFOLD AND THE GASKET MANIFOLD?????

First pictures of the US  2008 Corolla, that I know of.
WWW.toyota.co.jp  After that click on the Oct 10 news article.  Really
would like to see the 4WD version here in the States.

I have an 89 toyota corolla with a brake problem:
Pressing down the brake pedal, with a relatively low amount of
pressure, the pedal seems to have gone all the way down, as i can feel
the pedal hitting a bottom and hear the knocking sound. However, at

Over the last 2 years we have replaced 4 manifolds and currently
working on a getting a fifth.
We have all of them replaced under waranty so I have had no real out of
pocket expenses.  But the mechanic is saying that the supplier is not

hi everyone, i'm new and don't know anything but i really want a good
bass in my car. it's a 1994 toyota corolla with about 180000 miles on
it so i don't something really expensive or something that can be
removed and reinstalled in my next car. it has all the stock speakers

I found this in another newsgroup. :-)
A man walks into a bar and says to the bartender, "Beer for me, beer
for you, and beer for everyone who is in the bar now." After drinking,
the man starts walking out of the bar. "Hey, what about the payment?"

Do you believe in using fuel injection cleaners like STP in order to keep
your engine clean?  Is this a waste of money, worthwhile, or dangerous for
the engine?
Many thanks for your advice!!!

First Oil Change for the Scion (By me, anyway)
Whoever did the last one used a Genuine Fram OF and tightened it to the
max! I did MUCH better; I used a Bosch! (Hey...dealers are closed on
Sundays!)

Just replaced plugs on my 94 pick up w\ 22re engine. As
always have done in the past I purchased the plugs from my
trusty Toyota dealer. Had done this previously in 2002 but this
time after I removed the old plugs realized that the new plugs