What do you folks know about using nitrogen instead of air in tires?

Take a look at alt.binaries.images.fun for a series of images called The
Problem and then The Solution...
I got all the gunk cleaned up, and then went to torque the head bolts. I
saw somewhere spec is 59 Ft Lbs, but everyone recommends 65-80 ft lbs due

http://www.msnbc.msn.com/id/16698153/from/RS.4/
Take THAT!
But then my hubby says you guys die from being stressed by us.  HA the
sequel.

Disclaimer: Now bear in mind, I would LMAO no matter *which*
politician/office holder this was about (not wild about any of them), but
this was just so funny I had to share it:
http://cagle.com/working/070125/booth.jpg

These need changing periodically. I believe they do stretch and over time
the valve timing must move out.  If so, anyone how  much?  When one is
replaced does the new belt improve engine performance as the valves will be
brought back into the correct timing?

Yesterday while I was driving home, my 2000 Corolla suddenly could NOT
be accelerated, I could hear the load noise made from engine when I
pressed the gas but the car would not accelerate. If I pressed the gas
gently, the car slowly accelerate, but when I stoped at red light, it

...in a nutshell:
http://cagle.com/working/070126/tab.jpg
*snerk*
Natalie

I have a 92 toyota corolla all trac wagon. I am wondering if I would
be able to tow a 4 x 8 uhaul trailer from VT to OR with it?  It has a
standard transmission.
Thanks!

Hi Toyota experts,
How the f... do I get into the left rear "lighthouse" or lamp of this
car. I just need to change a bulb.
When opening the backdoor 2 screws come visible. If I remove them the

I try to find out where Crank POS sensor located on my 2000 Corolla,
according to picture described in Haynes repair book, it locates near
at upper right of engine(from inside car). I try to pull the
electrical connector but it is so hard to do so even though I push the

I just rode as a passenger in my wife's 2003 Corolla and feel like I
was tossed around the car.  It seems to fall into each dip in the road
and bounce off each bump.  It was a very uncomfortable 2 hours.  I
don't ride in the car much so I don't have a reference to recent ride

'Brought my 4runner in for the 1st oil change and I provided the wrong
info to the mechanic. Namely I erred in assigning the oil quantity of
the V8 to the V6. So I just drained some oil , myself, after driving 2
days - to bring it back from a quart over full.

Strong sharpening knives noise about 3 minutes after I start my Toyota
Corrola 1997. Noticed it lately when the weather is below 20 F. Colder
it is the longer it lasts. I noticed that the timing belt moves slowly
until the noise is gone. (I don't have an RPM meter). Also notce ...

I have an old 91 Camry LE.  I have been having problems with the
retraction of my seat belt and recently with the "open door" buzzer
beeping so that I can't lock my door.  From looking at other posts and
also from having the seat belt retraction problem previously, I

Toyota's production up; gap with GM narrows
http://www.freep.com/apps/pbcs.dll/article?AID=/20070126/BUSINESS01/70126004
TOKYO - Toyota's global production last year surged 10 percent to more than
9 million vehicles, the Japanese automaker said Friday, narrowing the gap