| Thread | Last Post | Replies |
|
| Two tyres on axle - different wear | 21 Dec 2005 03:45 GMT | 9 |
Is it generally considered necessary to make sure that tyres on the axle (say both front) are the same age? For instance, if you replace one front you should always replace the other at the same time?
|
| 1970 VW Beetle | 20 Dec 2005 18:53 GMT | 8 |
Please advise on where I can obtain some used spares for a 1970 VW Beetle. Most breakers yards do not seem able to help
 Signature Oscar
|
| Mercedes A Class | 20 Dec 2005 17:58 GMT | 1 |
Girlfriend bought a merc 1 year old, now 2nd service due, and mercedes want £400 ( car has done just under 8k ) Anybody know 1 what that service will cover?
|
| Oil question | 20 Dec 2005 12:08 GMT | 20 |
Couldn't resist re-posting this from another forum. "Having just paid £115 for the oil on my cars first service (8.25 litres), I was wondering if it is "the done thing" to provide ones own oil for a service? Anyone done it or is it one of those things where
|
| Megane cambelt broke - repairs? | 20 Dec 2005 09:01 GMT | 18 |
Is this likely to be DIY-able for a novice on these (and most new!) engines? Any ideas (guesses, even!) at garage repair cost (to enable cost benefit comparison) welcome.
|
| Too late to start using fully synthetic engine oil? | 20 Dec 2005 02:03 GMT | 13 |
I have my car from new and have clocked up 17 200 miles. The past oil changes were done by the dealerships and I have to assume they did not use the expensive oil. So, is a change over to, say, Mobil-1 at this stage too risky, or is it OK? If it is almost risk-free, naturally my ...
|
| Renault Clio '99 Wiring Loom - how do I get to it? | 19 Dec 2005 23:54 GMT | 3 |
I've bought a sterring wheel stalk adaptor for use with my stereo. It looks like I need to get access to the wiring loom to plug it in, but can't for the life of me figure out how you do that. Can anyone give me a pointer? Do I need to remove the entire dashboard?
|
| Rover 600 headlamp asembly removal | 19 Dec 2005 22:33 GMT | 4 |
How do I remove a headlamp from a rover 600. Looks like just two bolts at the top and it will pop out the front. However guy at scrappy says I have to drop the bumber as there is a bolt underneath. I cant see a bolt underntah though so dont want all the aggro for nothing
|
| All three brake lights non-functioning!!! | 19 Dec 2005 21:10 GMT | 4 |
Vauxhall Zafira 1.8 Elegance. Year 2000 model. Today, the 'Brakelight Check' warning on the dash computer stayed on my entire journey. When I checked, ALL three brake lights were non-functioning: Left/Right
|
| Ford Stereos | 19 Dec 2005 17:39 GMT | 2 |
Could someone please enlighten me? What is the difference between the Ford 6006 and 6006E 6 disc changers? I can't seem to find this anywhere. And are they any good???
|
| Mondeo Verona 1999 - Alarm Problem | 19 Dec 2005 17:27 GMT | 6 |
Hi, Wondered if anyone could advise me. Since I bought my Mondeo I have only set the alarm with the door key, as the fob does not work ( presume battery gone).
|
| Problems with 1993 Peugeot 405 1.9stdt | 19 Dec 2005 13:33 GMT | 4 |
I bought this car back in June, it drove nicely on a test drive around town and it had a brand new MOT. The first time i took it out on the motorway i discovered that it developed a humming/rumbling noise at over 40mph. It also very soon developed clutch judder and several other
|
| jaguar gearbox | 19 Dec 2005 11:39 GMT | 10 |
Does anyone have an approximate cost on changing a jaguar 3.0 S type SE gearbox? MTIA
|
| VX Moanaro New or Old ? | 19 Dec 2005 01:45 GMT | 19 |
Anybody had a Monaro. Have heard that the new one is not as good as the old one ( ie 6.0 versus 5.7 ) due to all the added emissions c**p. John H
|
| Citroen AX 1.5D heating/coolant | 19 Dec 2005 01:11 GMT | 7 |
There's hardly any heat getting through to the passenger compartment heater on my AX. Although other things have yet to be ruled out, I suspect that the heater matrix may be airlocked. I can only find one coolant system bleedpoint (between the expansion tank and the bulkhead) and ...
|