| Thread | Last Post | Replies |
|
| Peugeot 205 engine and gbox removal from old H reg | 18 Jan 2006 19:44 GMT | 7 |
Whats the quickest way of getting it out. Bearing in mind i do not have a hoist at present. Throu the bonnet, or lift the body and out the bottom. What are the pitfalls either way.
|
| SEAT Toledo stuck in Park | 18 Jan 2006 16:43 GMT | 8 |
My Toledo SE 20V Auto (2000, W Reg) has started to stick in park. When I depress the brake pedal the light on the console by the transmission lever stays on so I cannot move the lever into drive. After a number of attempts is seems to free itself. I noticed that sometimes ...
|
| Peugeot 106 Brake Drums - tools required to remove? | 18 Jan 2006 15:22 GMT | 1 |
Can anyone tell me the size of the nut holding the rear drum onto the axle on a 1998 Peugeot 106 1.1? Have to go and look at one with handbrake problems tomorrow away from my garage, and want to ensure I have the right tools with me!
|
| Jittery Volvo | 18 Jan 2006 12:39 GMT | 15 |
The S40 (bog standard 1.8) has always been mildly fidgety on the much-dug-up, pothole-ridden dirt tracks the council have the audacity to call main roads round here, but lately it feels worse, giving a fair bit of feedback through the steering wheel especially when braking on an ...
|
| RAVE CD's | 18 Jan 2006 09:00 GMT | 4 |
I have a '99 Rover 200 and would like a legit RAVE CD - any idea where to get one? I understand that they go for around £50 which is OK with me. Thanks,
|
| Transit cylinder head bolts torque settings | 18 Jan 2006 01:40 GMT | 5 |
The transit cylinder head gasket change continues. Accord to the haynes manual torque settings for transit head bolts are Stage 1 52NM
|
| Mondeo Odd Roadwheel Noise at Rear | 18 Jan 2006 01:35 GMT | 3 |
Morning All OK, my much loved Mondeo 2.0 Ghia X (manual, petrol) has now racked up 140,000 miles, over the six years I've had it. Think I'd better look at changing it soon, as I feel there's almost nothing left on the clutch, but
|
| Advice needed on which alarm to get for my new motor | 17 Jan 2006 22:59 GMT | 9 |
Having just recently replaced my ageing BMW E34 with a '99 E36 323i Touring, I was amazed to find it wasn't fitted with any alarm or immobiliser as standard. Any advice as to a decent quality unit/system for DIY fitting? I want to do
|
| HT Leads | 17 Jan 2006 21:49 GMT | 4 |
What are the best make HT leads? I want to renew the ones on my Rover 214SEi. Halford stock their own make and Bosch. I don't mind paying more than normal if I know they're good ones. "You get what you pay for" as they say.........
|
| Anyone know a source of a decent test lamp? | 17 Jan 2006 21:49 GMT | 10 |
I'm after a test lamp to figure out what is killing the battery on the other half's motor, but no-one seems to do them! I haven't got time/patience/inclination to knock up my own, so anyone got any pointers to a decent supplier?
|
| HT Leads | 17 Jan 2006 19:34 GMT | 5 |
What are the best make HT leads? I want to renew the ones on my Rover 214SEi. Halford stock their own make and Bosch. I don't mind paying more than normal if I know they're good ones. "You get what you pay for" they say.........
|
| Mazda MX5 Battery | 17 Jan 2006 19:16 GMT | 6 |
I've been regularly using a jumper to restart an MX5 for a neighbour (3 years old - the battery not the neighbour). She only uses the car infrequently - perhaps 3 times per month hence the problem. It lives in the garage so starts pretty easily.
|
| starter motor probs ;-( | 17 Jan 2006 15:59 GMT | 10 |
Can anyone help i had to replace my starter motor which had done 70 thousand miles on my 2001 (Y) mondeo then 4 weeks later this on went now just put on another recon and it wont start at all does anyone have any ideas???????????
|
| Maxi | 17 Jan 2006 15:44 GMT | 2 |
Saturday I saw an orange T-reg Maxi on the M25 near Clackett Lane. I mentioned to my son that I'd seen the same one round Telford and he didn't believe me. Went to Wolverhampton today - and there it was, parked up on the verge
|
| charging a car battery \ alternator | 17 Jan 2006 14:53 GMT | 23 |
ok I gather the alternator is basically a charger ? I was wondering if I use a home charger to charge my car bettery would it take a little strain off the alternator ? Just curious really ...
|