Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / UK Car Forums / Car Maintenance (UK group) / March 2006

Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
Jeep mechanic in North West09 Mar 2006 19:08 GMT1
Looking for a jeep mechanic in North west. Dealers charging £150 an hour.
Can anyone recommend one?
Thanks in advance
Clarky
Engine Electronics Warning light - MkIV Astra09 Mar 2006 11:34 GMT3
Hey all,
I have another little problem with my Astra, which I thoguht I'd run by
y'all since you were all so helpful last time...the Engine Electronics
warning light (the one that looks like an engine with a lightning bolt
Identify the Noise - Results / The Next Horrible Horrible Part of the Story09 Mar 2006 00:00 GMT9
And the winner is <drumroll>
nigel.
The crank pulley was indeed the rattle. It wasn't disintegrating as
described, but the bolt was tight but not firm to the washer
Power steering leak08 Mar 2006 20:49 GMT5
Hi, the high pressure hose on my rover 400 is leaking and drips on to
the manifold. it is worse when turning the wheels on full lock and when
parking up. the smoke is a little worrying not only to myself but to
those that are around to see it :-) can I get a replacement from any
how powerful are electric power washers08 Mar 2006 20:24 GMT11
anyone every hear of anyone injured by a home powerwasher (under
1500psi electric types)
i read the safety warnings in the manual before starting to wash my car
but i noticed
Bedding new shoes in08 Mar 2006 19:37 GMT12
I changed the rear discs and handbrake shoes on my Volvo at the weekend.
The discs were badly corroded and the shoes were starting to de-laminate.
Since completing the job, I have found that a much greater effort on the
handbrake is required to hold the car stationary. I have ...
Clio 97/8 interior light fitting08 Mar 2006 18:29 GMT1
Anybody able to tell me how to remove the interior light unit so i can
get rid of the water that has leaked into it?
Stop start engine 08 Mar 2006 18:22 GMT5
My Rover Metro 96 has started spluttering, like it isn't getting enough
fuel.
It happens occasionally, but its getting more and more common.
I'll be driving and suddenly the engine will splutter, as if it isn't
Head Gasket replace on sierra08 Mar 2006 15:01 GMT6
I know this question is a bit like, how long is a piece of string, but what
would be a reasonable cost for a decent back street garage to replace a head
gasket on a Sierra 1.8 CVH. Looks a fair amount of work to me and the manual
is full of complex sequences for retighening head ...
C5 Indicator Problem08 Mar 2006 09:08 GMT4
I have a 52 plate C5.
It's a 1.8 LX Petrol.
I have had it for 2 years now, and have had very few problems with it,
until now !
Mondeo Mk.II Clutch - Borrowed Time!08 Mar 2006 08:01 GMT11
Evening All,
My Mk.II Mondeo Ghia X, which I have 'self-serviced' for its entire life, is
now getting to a point where I think I really should replace it! Trouble is,
it's been a brilliant car over the 6.5 years that I've owned it (since Sept
Replacement tyre07 Mar 2006 16:23 GMT13
My Scenic is fitted with Continental ecocontact ep 195/65 R15 91T tyres.
There is a nick in the wall of one of them so it needs replacing.  I tried
my local National garage and they offered me a Avon which I declined.
I can't seem to find anywhere that has this brand of tyre, the ...
USING TO MUCH PETROL07 Mar 2006 16:22 GMT10
HI how many miles  are you getting on a full tank of petrol and we are
getting black watery fluid coming from exhaust every time we start up
the year of gulf 2000 GTI
Alloy wheels?07 Mar 2006 16:20 GMT10
Is it normal for alloy wheels starting to blister after 18 months (16000
miles)
The blistering is concentrated in the middle of the wheel around the
manufacturers badge, and is starting generally all over, it's now looking
Popping out spark plugs07 Mar 2006 16:19 GMT3
The next exciting installment in the saga that is my Fiesta 1.25Zetec-S
(1998)...
I managed to have a spark plug actually pop out of the cylinder head
yesterday.  It appeared intact and went back in quite happily but it did
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 February, 2006
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.