Anyone know of someone who can take scrap vehicles away for free in the Bath
area? Alternatively for as little cost as possible!
Needs to be towed as the head's blown!
Cheers,

What headlight is '94 Mazda 626 using?
That one is H3 or H4? As i couldn't find the bulb size from the manual
and I can't tell the size just by looking at it.
Thanks~

Does anyone one know if i can get strenghtening plates for a fiat punto
door lock.
Someone hammered a screwdriver through the door skin of my Punto and
popped the door open and I would like to be able to stop this happening

1992 Rover 214 SLI - suddenly (within a few hours) developed a problem
with the ignition light staying on. When starting the engine the light
stays on bright but revving the engine makes it dim slightly. However
it stays lit whatever.

Time for another "what was your first car" thread methinks ;)
Mine was a 1972 Mk1 Escort 1.3 GL. I rolled it after two weeks and was
still paying off the bank loan three years later. I then bought a Mk1
Cortina 1500GT for £50 which my "mate" managed to blow up. I went back

Just bought a Tdi focus (2000) and it only has a standard key, can I
just buy the ones on sale on ebay and program it? or has it got the
PATS thingy?
if it has PATS, what will this entail?

I've got a dead rear washer on a K11 micra, exactly why I'm not sure, as
I forgot to check it when the bumper was off - it makes noise, but no
flow when the nozzle is disconnected.
Can it be a MOT fail?

I have a Rover 820i which was broken into a few weeks back.
The car is fine but the central locking has started playing up. If I
lock the passenger side door, the central locking locks then 2 or 3
seconds later, as soon as the key is removed, it unlocks.

At Haynes' suggestion I tried to remove the N/S track rod end in order
to pull the driveshaft out before swapping the gearbox. Turns out I
didn't need to. Didn't need to remove the hub to suspension strut
balljoint either. The track rod end balljoint separated OK but now I

http://www.wimp.com/excellent/
Slevin

Hi, does anyone know where I can get a good recon gerbox for a Focus
TDi ?
local place has given me a price of £440 fitted, seems fair?

A friend has a Multipla JTD 1.9 2003 vintage. He needs to know how to
reset the computer that tells him when oil changes and the like are
needed as he'll be doing his own servicing once the warranty is over.
£150 for Fiat to change the glow plugs!

Have had trouble with my ignition barrel on my N reg Vauxhall cav, managed
to get it out but by mistake I pulled out the ingnition switch which went
everywhere. Have put it back together now but I get the yellow warning light
on the dash, checked for a spark & their was nothing.

Don't know if this is an appropriate group for this topic, maybe somone
could direct me if not.
I looking at buying an 'L' Reg LDV Convoy 2.5D Camper conversion with
Peugot engine/gearbox (90,000 miles) but have difficulty in  changing

Hrm.
the Thermostat Housing is held on with a nice big dollop of Silicone
sealant. It makes the housing virtually impossible to move. Short of
maybe getting a knife in there, any tips?