| Thread | Last Post | Replies |
|
| Fiesta Mk5 hub nut | 01 May 2006 00:02 GMT | 14 |
There's brake fluid dripping out of the rear drum but I can't get the hub nut off. There looks like there is metal bent around the nut. Photo here. http://www.hpjw.co.uk/DSC01775.jpg There's no split pin I don't expect a hub nut to be overly tight so I don't
|
| Metro wing mirror for sale. | 30 Apr 2006 22:57 GMT | 4 |
I have a nearside mirror for a Mini Metro for sale, I want a fiver for it.
 Signature Regards, Vince
|
| Brown keys, or the joys of Fiat ownership. | 30 Apr 2006 22:08 GMT | 8 |
I've just done a clutch on a Seicento and having had the battery off for a few hours, and now the jolly thing won't start as the immobiliser has set. I've now got the brown key and one blue key and I can't get the stupid thing to go. The local Fiat dealer doesnt seem to know ...
|
| Failed MOT | 30 Apr 2006 19:03 GMT | 102 |
my car just failed the mot becvuase the battry tray area was corroded, i have looked into it and been quoted 150 for weld a new one in, could i just simply move the battry to the boot of the car and put it in for a retest would it pass or still fail.
|
| Corsa 1.5D help please | 30 Apr 2006 18:48 GMT | 5 |
Im hopeing that somebody may have experienced a similar problem? My sisters was returning from the coast in her Mreg 1.5D corsa when it overheated, the temperature dropped and then she lost all power. On getting the car home i found a water pipe had burst, replaced the pipe
|
| Washing With Hosepipe Ban | 30 Apr 2006 17:47 GMT | 67 |
How can I legally wash under my wheel arches etc. during a hosepipe ban? Any ideas where I can read about the law etc.? It is apparently very strange, and you are actually allowed to use a power washer for some
|
| Sticking car lock solenoid | 30 Apr 2006 09:25 GMT | 2 |
My Rover Metro 96 has central locking, but the motor in the drivers side door won't stay open, when I attached it, it opens then immediately closes again. I went to the junk yard, got a 'new' lock, same problem.
|
| Stupid speculation | 30 Apr 2006 01:33 GMT | 5 |
I've noticed those horrid blue add on rev counters on pods that the erm.. cruisers add on to the cars that they ruin. Is there any way to add a rev counter to an old car that hasn't got one? I'd assume that the wiring just isn't there for it. '92 Pug 205 1.8d.
|
| mercedes 109 clutch problem | 30 Apr 2006 00:05 GMT | 1 |
the clutch on my merc is a bit funny in first and second, with occaisional burning smell coming (possibly through the heater, not sure) when stopping and starting. is this a common problem? and could it be more than clutch, i.e. gearbox..... any help appreciated.
|
| sooty flame trap = air leak & cat issues? | 29 Apr 2006 23:57 GMT | 2 |
'02 Merc S320 diesel. Merc are saying that a cat needs replaced because 'there's a small amout of soot between the turbo and the flame catcher (sic.), so we think there's an air leak somewhere'. Given a separate, independent merc specialist has said 'there's nowt wrong with
|
| Gauge of steel sheet for body/floor welding for MOT standards. | 29 Apr 2006 21:57 GMT | 12 |
I've searched and can't find any definitive thickness of steel I should use. What are the rules?
|
| whiffy diesel golf | 29 Apr 2006 19:21 GMT | 22 |
My friend Iain has an N reg Golf diesel estate, and it pongs inside apparently. He was talking about trying to cure it by changing the oil, but I said I would ask you guys before he disposes of some of my son's future resources needlessly.
|
| Mondeo TDCi Starting Problem | 29 Apr 2006 18:47 GMT | 10 |
Just started the car ok and drove it 1/4 mile down the road, popped into a shop and it won't start returning after 10 mins. On switch on all dash lights ok, glow plug light extinguishes. On cranking, turns over fine, all lights go out but flashing glow plug light starts after a ...
|
| Zafira Noise | 29 Apr 2006 17:03 GMT | 1 |
Hi i have a noise on My 2001 Zafira and wondered if anyone could help. It has been to the garage this week and the mechanic changed the brake pads at the front and the fuel filter , he drove the car before i picked it up but didnt make the noise for him. It is a grating noise
|
| rover 214 hydraulic tappets | 29 Apr 2006 14:48 GMT | 1 |
can anyone tell me when you take out the hydraulic tappets from a rover 214 k series does the oil hole have to face a certain way round. i know they have to go back in the hole they came out of i am just not sure on if it makes a differents which way the oil hole faces.
|