For those three people who may be interested...
Drives nice for a car that's 17 years old and has done 147k. No
rattles, hardly any squeaks. Rather quiet at speed as well. Front
wheels need balancing as they transmit a bit of vibration at 'Shorry

H1 bulbs, don't fit my current car, so on the bay.
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=8065998899

Spray on finish that looks like electroplated chrome:
I have some plastic's on the exterior of the car I would like to have a
chrome like finish.
I have seen one or two products one the local diy/paint shops ect.I was

Finished bleeding my rear brakes after new bearings, discs, pads, pipes,
calipers.  When I took off the front-right wheel alloy middle cap, I
noticed that the bearing cap wasn't intact, and there was no grease in
the bearing.  I was speechless.

after flat battery car will not start due to management light flashing.
fault code 1503 = immobilisor incorect signal....any idea,s anyone.

Hi, I'm in rather a mess with my ex-wife.
After a mechanic replaced her starter motor the cd player didn't work.
Well, as he did it cheaply I told her I'd replace the fuse at the back
and that should sort it. Indeed it did but as I pulled the cd player

I'm coming up to the reknewal time of changing my brake fluid. I will be
doing it alone and was wondering if someone can recommend a one man blleding
kit ?
Cheers

The air conditioning on the family car (Rover 420SDi) wasn't working too
well so last August I called out a mobile regassing unit. They had a lot
of trouble getting the new gas to go in, so they said, then after that
it didn't really work at all. You could still hear the compressor

As subjec really, looking for a set of axle stands happy to pay for quality
and a jack.
Cheers

The immobiliser has gone badly wrong on our 2000 Grande 1.2 Renault
Clio. It has been "off" for some time, but it was possible to start the
car by holding down the button on the key fob as you turned the engine
over. Now this does not work. We were having battery issues so have

I've just bought a Nissan Almera 2.2TD, with the 110hp engine, in need of a
service.
I've just attempted an oil change and the filter would not come out.  It's a
cartridge type filter, so you have to take off the housing.  In the process

First of all Hi, My Pug 405 quasar 1.8 is doing my nut in. I just canno
get the fast idle emissions down far enough to pass. I've done full oi
change and filter, air filter, unclogged and cleaned every pipe I coul
lay my hands on, re routed the breather hoses away from entering the ...

I park my car in the fairly narrow space between the side of the house and
the boundary wall.
Parked on a concete slab with a rendered house wall on one side and a 3 foot
tall concrete wall on the other.

Im about to do the cambelt/tensioners/waterpump on a corsa. Does the
engine mount have to come off and the engine lowered slightly to enable
the alternator belt to be removed prior to starting the cambelt etc?
Its the haynes manual telling me this which seems a little excessive

what is proper way to adjust back drum brakes on 88 cougar?