| Thread | Last Post | Replies |
|
| Bumper repair | 06 Jul 2006 13:22 GMT | 19 |
Can anyone tell me if they have had a bumper respray which has lasted as good as the factory paintwork? Would love to know if it is possible! You will see on another post I have had 4 repairs to a bumper now and it is chipping off very easily.
|
| Mondeo - A Few issues | 06 Jul 2006 08:48 GMT | 3 |
Aquired in the last couple of months a 2001 2.0 TDDI Mondeo with 110K on clock. I've got a cigarette lighter that's not getting power. Found the fuse box but no specific fuse for lighter. Any ideas or pointers. I know it sounds
|
| Is a fixed headlight an MOT failure | 06 Jul 2006 08:06 GMT | 4 |
Car is a 96 Renault Clio, drivers side headlight and sidelight smashed by kamikazi deer. I've replaced the headlight and sidelight with one from a scrapper but the replacement doesn't have the mechanism to connect to the headlight
|
| Handbrake on the Ka | 06 Jul 2006 07:51 GMT | 4 |
Hi all again, The handbrake on the wife's Ka is very stiff and I'm a little worried about the cable being over stressed. When it last went to the garage they adjusted it but it ended up even stiffer. My Fiesta's handbrake is
|
| painting metalic | 06 Jul 2006 07:49 GMT | 24 |
I was reading some previous threads in here from google and read that you shouldn't wait for metalic paint to dry before you lacqer it. Is that right ? if so how dry\wet does it have to be ?
|
| Hubnuts and odd noises | 05 Jul 2006 23:28 GMT | 12 |
Horrible 1995 Favorit estate. Yes, the one that never goes wrong (!) Question 1: Would a garage necessarily have to remove the driveshaft nut to replace the outer (long) driveshaft boot or is there a magic way of changing boots that mere mortals don't know about? It's not a lick ...
|
| Pug cat costs??? | 05 Jul 2006 22:40 GMT | 6 |
I got a 1998 106 1.1 zest2 Pug with a rattling CAT on the exhorst. Been told £140 by local kwikfitting type of place. Is this about right please ???
|
| 98 Vectra SRi | 05 Jul 2006 21:56 GMT | 4 |
Anyone here good with these engines??? Just noticed a leak after buying this car 2 weeks ago. Does it look serious or is it the alan bolt that is leaking and can they be easily replaced??
|
| ATTN: Everybody | 05 Jul 2006 20:12 GMT | 12 |
Air con failure is the new Carb Icing AICMFP!
|
| Mondeo Mk1 Wheel /Tyre size | 05 Jul 2006 20:03 GMT | 2 |
Wonder if anyone could help with a simple question? Have 6J x 15 wheels with 205 55 15 tyres on, could these tryes be changed to 195 60 15. From the digging around I have done it would appear the answer is yes. Could
|
| Volvo Stalling | 05 Jul 2006 19:34 GMT | 7 |
Got a 1994 Volvo 940 Turbo Estate. More and more regularly now it's cutting out. Tacho drops to zero (even if the wheels are still turning the engine) and Lambda light comes on. Leave it a minute or so and it will restart and drive normally - until it happens again.
|
| Aircon Vectra B | 05 Jul 2006 17:01 GMT | 9 |
Anyone any idea what Vauxhall charges for new piping for the aircon(Alu pipes going from the compressor to the condensor)? (Part only) Thanks
|
| Slightly OT, car insurance renewals | 05 Jul 2006 16:00 GMT | 12 |
I dunno if this has been mentioned here before but I haven't seen it and it may help some of you in the future. I moved to AAInsurance last year as they are the cheapest for me and quite possibly the cheapest for many. Now to be honest I'd been with them for a
|
| Air Con Mintenance - Ford Fiesta | 05 Jul 2006 13:10 GMT | 1 |
My wife's Ford is suffering from an inadequate A/C system. It has now started to leave pools of water on the car mat. What is the problem and how can I cure it? Geoffrey
|
| FORD GALAXY STARTING PROBS | 05 Jul 2006 08:35 GMT | 10 |
I've got a Ford Galaxy 2.0l petrol which is doing something odd yesterday and today! It fires first time as usual but only runs for a few seconds and then cuts out. It's got fuel in it :o) Any help most appreciated, could do with car for work tomorrow!!
|