| Thread | Last Post | Replies |
|
| aircon on a mondeo 1998 | 29 Jul 2006 22:35 GMT | 13 |
hi,the aircon is only cool, and the engine revs when aircon is on,any advice thanks,millzee3
|
| Price to pay | 29 Jul 2006 21:49 GMT | 9 |
I know this is maintenance but this NG seems a little more active than others! Thinking of replacing my "P" reg Golf GL TDi with a 04 version. Price says £12,995....
|
| Rearended then two weeks later 2nd gear goes ? | 29 Jul 2006 18:29 GMT | 10 |
Short version: Is it possible to get gearbox damage from a rear-end shunt that did not cause any cracking of a bumper. Bumper was pushed in about 1.5 inches on one side though and now when passengers are in the back there is a
|
| Euro Car Parts panels | 29 Jul 2006 14:21 GMT | 6 |
I need a rear body panel for my Mk2 Golf. VW want £115. ECP want £41 for a "pattern" part. Ditto door skin, VW £121, ECP £35. Anyone got any experience with this scenario? The labour and paint is going to be £500 for this and other bits, so I don't want to ruin it
|
| vectra cutting out | 29 Jul 2006 13:12 GMT | 3 |
i have a 2000 vectra 1.8 ls 16v it has started to cut out usually when braking at junctions, parking etc. it starts ok and no warning lights, apart from battery light flickering when its cutting out
|
| Windscreen Trim | 29 Jul 2006 11:29 GMT | 3 |
Anyone had problems with a well known windscreen company - I have had 3 screw cover caps lost on the plastic trim below the windscreen - two holes filled with black sealant and one missed. Will be taking the car to the branch on Sat but I am not impressed so far by
|
| Reduce fuel consumption avg. 13%, greenhouse emissions 50-80% and increase power | 29 Jul 2006 10:37 GMT | 30 |
The EcoMag Activator System is a revolutionary component that can reduce the fuel consumption combustion engines, while at the same time reducing greenhouse gas emissions and giving your engine more power. By reorganising the molecular distribution of the fuel and air intake into
|
| Head Gasket | 29 Jul 2006 09:14 GMT | 8 |
Hi. Could someone reassure me that my Freelander 2001 V6 that has started to lose about 1/2 pint of coolant a week is not a head gasket problem. It's going into the garage soon anyway, but how can I tell that it is definately not this? The coolant is clean, the car runs
|
| FORD Mondeo wheel nuts wanted. Rv! | 29 Jul 2006 00:40 GMT | 9 |
Worth a try.... Someone was at my alloys last night and got two standard nuts out before the noticed they locking ones... Duh! They took the removed ones away. Does anyone have a
|
| How to adjust the idle speed on a Rover Metro Injection 1.4 | 29 Jul 2006 00:36 GMT | 4 |
Does anyone know to adjust the idle speed on a Rover Metro 1993 Injection 1.4 engine? Thanks, Gary
|
| electricity problem with 97' buick skylark | 28 Jul 2006 22:23 GMT | 2 |
Hi, all, my 97' buick skylark loses its electricity if I don't drive for several days. After battery replacement, it works fine again. I suspect the electric system is aged and some parts of it drain the
|
| Anyone got any R12 left? | 28 Jul 2006 21:32 GMT | 4 |
As title really. I don't want to go over to a replacement mixture as they all seem to have problems. R12 can still be got in the states (although very dear) but I can't get anyone to ship me some. mrcheerful
|
| White wall tire's | 28 Jul 2006 19:48 GMT | 3 |
Can anyone recommend a tire surlier that may have white wall tire's,or white wall rings- I don't know if the rings (for a word) are still made.I remember when I was a lad my old man fitting them to his Consul ,just a white ring of rubber fitted between the wheel rim and tire.I ...
|
| Transit 2.5 diesel engine - what's this bit do? | 28 Jul 2006 17:46 GMT | 14 |
Kept meaning to take a photo, then forgetting... I've bought a circa 1986 Transit 2.5 diesel engine + conversion plate for my Land Rover and it has a pulley/pump thing on the side that I can't figure out. It's on the right hand side, driven from the back (non
|
| 1.8 Zafira high idle when cold | 28 Jul 2006 13:46 GMT | 8 |
Hi, just bought a Zafira 99. It idles high when cold ( 1100 -1200) but is fine when fully warm (800) any ideas? Cheers
|