| Thread | Last Post | Replies |
|
| Pug 205. Repair worth it? | 13 Aug 2006 13:46 GMT | 15 |
My Father in Law has an H Reg Pug 205 Diesel (non turbo). It's old, high mileage (140k) and has developed 3 problems. 1) Appears to be leaking oil from the head gasket, at the back of the engine, but this could be linked to 1a), some spanner monkey has damaged
|
| Astra 1.6 2003 Emission warning light | 13 Aug 2006 12:57 GMT | 3 |
The Emssion warning light has latched on permanty on my Astra. What are likly causes? I did take it down a very dusty road could it just be a case of new air filter or something worse?
|
| Changing engine mount on BMW 325 E30 | 13 Aug 2006 09:02 GMT | 6 |
The rubber engine mounting has broken on my BMW 325 E30. All the local motor factors seem unable to get hold of the part, and BMW want 33.71 for this little bit of rubber (and a stopper). Does anyone have any suggestions about other ways to get hold of one of these?
|
| Astra exhaust / emissions warning light | 13 Aug 2006 08:32 GMT | 18 |
Booked me and the wife a nice little weekend break in Paris. Set off on Friday for Heathrow (only have to arrive 30 minutes prior to departure with carry-on baggage as I had checked-in on-line and had booked BA Express Parking - you drop it off right outside the door).
|
| How buggered can a caliper be and still be refurbed? | 13 Aug 2006 01:07 GMT | 3 |
I've got some Golf 16V brake calipers that I want to refurb. The car's in bits, so they can be done on the bench. But they're very very very rusty looking. Can you just wire wheel them down, or am I more likely to get a set of working calipers by exchanging them at the factors?
|
| Not all garages try it on | 12 Aug 2006 16:02 GMT | 32 |
Reading through the Focus MOT thread reminds me of a case of unauthorised work by a dealer a few years ago on my Focus. I had taken my Focus into a local main Ford dealer for a standard service. We had agreed a fixed price in advance (they price matched
|
| diesel car starts when cold but not when warm | 12 Aug 2006 15:26 GMT | 2 |
bump starts ok, runs excellent. can anybody help
|
| Another holiday question | 12 Aug 2006 12:13 GMT | 10 |
I guess nobody had an answer on the headlights... Next question: Does Europe (specifically Germany) use the same oil viscosity ratings as the UK? Will I be able to buy 5W30 Oil for my Zetec engine off the shelf there or will it be called something else?
|
| Astra 1.7 dti | 12 Aug 2006 10:55 GMT | 1 |
My Astra 1.7 dti (y17dt isuzu engine) had a flat battery I jump started it disconected the jump leads and after a few seconds the engine stopped and would not restart. The car was recovered and eventually ended up at the Vauxhall dealer where
|
| Ford Modeo TDci | 12 Aug 2006 10:48 GMT | 1 |
My 2001 Mondeo has just developed what I can only describe as a flat spot in its acceleration. This only seems to occur in 4 and 5 and is around the 2000rpm mark. Once above this mark the acceleration is as it was right unto 3500+. Any ideas? Also the central locking has just ...
|
| VW garage poole \ ringwood ? | 11 Aug 2006 22:35 GMT | 2 |
Howdy doodily all, Just wanted to know if anyone could reccomend a vw garage in the poole or ringwood area ? Vw golf is coming up a a service and needs VAG-com hooked up as there are a
|
| Mondeo Mk3 Clutch/Flywheel | 11 Aug 2006 19:07 GMT | 2 |
I wonder if the gathered brains of the forum could answer a few questions for me: 1) Is the Mk3 (2001-) Mondeo with 1.8/2.0 Duratec HE engine always fitted with a dual-mass flywheel (DMF)?
|
| The Polo Saga continues - whistling | 11 Aug 2006 18:07 GMT | 6 |
There's a whistling noise in my Mum's shitheap of a Polo. 95 1.4 8v by the way. It seems like it's vacuum related - cruise along at 70 and you can hear it loud, put the brakes on and it dies away. It sounds like it's coming from behind the middle of the dash, but I doubt there's ...
|
| Ford Ka - rear wheel bearing torque setting | 11 Aug 2006 08:38 GMT | 4 |
Anyone know the torque settings for the rear wheel bearings of a ford ka? Cheers!
|
| rover head gasket | 11 Aug 2006 08:37 GMT | 8 |
hi, ive got a guy coming to fix the head gasket in a couple of days, he phoned up to ask what the chassis/vin no is, is this normal , thx
|