Re 05 Focus 1.6 15k miles
Just aquired the above,  the gearbox seems to make a clonking sound
when realeasing the clutch during gear changes,if you let the clutch up
slowly all is fine but during normal driving it makes this sound most

We're offering all the latest factory pressed high quality dvd movies,
ps2, psp xbox and xbox 360 silvers with factory printed colour inserts
at fantastic prices, whether for personal use or reselling. We're
shipping worldwide with various shipping methods. For resellers, please

Hey everybody, i'm new to google groups, so hi!
i have found a lot of helpful information already in here
http://groups.google.co.uk/group/uk....d2b82283750e3c
and basically have narrowed my problem down to the fault code 25 which

I've googled around for the widths of Ford Focus, with mirrors, but am
unable to compare a Y reg 1.6 Zetec with a new Focus.
Is the new model wider? And if so what is the difference.
Thanks

Hi warren again could you please tell me how to advance the timeing on a
transit  1998 model as ive been told this could be causing the misfire that
it has. Thanks warren.

I got my gear box changed recently, a different type of gear box was
put in ie not identical to my original  ( a left hand drive one
possibly).
Anyway all is ok except my speed indicator in panel isnt working.

I've got a VW Bora.
According the haynes manual, the axle stand location for my car is on
the sills.
My axle stands have a flat saddle - as in

I'm working on my Omega 2.5v6 and trying to help someone identify inlet
and exhaust cams I had a look at mine while they were out.
According to the letters stamped on the cams I have 3 inlet cams and 1
exhaust cam. I haven't had a noticable problem with the engine running

I have a 1999 toyota corolla diesel car and lately it has started
beeping at me. It beeps about 16 times approx , takes a break, then goes
again.
I tried not setting the alarm but it makes no difference. Any help

The car is a 1986 Audi 100 (5-cylinder KP engine, petrol)
In order to get rid of an oil leak, I've renewed the front crankshaft
oil seal, the front camshaft oil seal and the valve cover gasket.
Now there is oil coming out (in volume) from the valve cover gasket.

Hi, I recently had my N reg 2ltr auto Omega's cooling system flushed
out with a chemical flush and had it refilled with pink anti-freeze. I
noticed there was sand like sludge which came out of the system, even
though I'd flushed it myself about 12 months ago with running water.

I've just got my car back from the dealer with a new (exchange) Z20LET
engine and a new clutch. They threw in a service for free as I was
paying for all that! The engine number on my V5 obviously needs altering
now.

I was just wondering if it poss, as i like my granadas and my manual
trasmissons!!  not me auto yuk!!
im hoping for an easy answer to this is poss and if it werth going to
get it done or my self doing it?? WELL I'LL GET TO THE POINT!!!

Our '99 Fiesta Ghia 1.25 was running perfectly when we gave it to our
daughter  a few weeks ago. Now she says it's cutting out at low speeds
(15-20mph) normally when she's in 2nd gear and turning a corner. It
completely loses power and the ignition light comes on. It restarts

while driving my wifes car today(96 fiat cinquecento) temp guage went
thru the roof all of a sudden, pulled in straightaway and opened
bonnet, steam etc, like a cow lookin over a wall so used breakdown
assist(covered by insurance), only waitin for bout 30 mins, guy took