My trusty 1997 1.25 Zetec Fiesta has started to give me problems lately the
blower has stopped working in positions 1 - 3  but position 4 (full on) is
OK.  Does anyone have any ideas on the problem and if so is it a diy fix or
garage.  Any idea of the approx garage cost would be ...

I had a quote today to fit a new cam belt of only £75 (2000 Multipla
105JTD), it seems labour is only about 1 hr.
I can't remember the last time having anything done cost this little, I
daren't book it in.

About time!
http://news.bbc.co.uk/1/hi/uk/6179481.stm

My 1996 Transit has a Ford 2015 audio unit.
   I've just had some welding work done on the van and the battery
was, of course, disconnected whilst this was done.
   I put in the keycode (but see below!): the numbers appeared, but

I thought these were not street legal but apart from the chav mobiles I
also notice my local buses all have LED indicator & stop/tail bulbs
fitted.   The tail led's are arranged so they display the sign of a left
& right pointing arrow and when the brake lights come on they go

Any usual suspects for intermittent noise from brake drums under braking?
Sounds similar to when your brake pads have worn down to the backing and are
grinding your discs away, but it's mysteriously gone away...

Got a 1999 Mk1 Fiat Punto 60, 94k miles, definitely needs rear brake shoes
and both rear brake cylinders replacing.
Brake drums have been declared to be close to max. allowable internal
diameter and "unevenly worn". When queried this they said one was worn 0.8mm

we are the new suspension factory
please visit
www.kptracing.com
if have any about the chassis technic question also can ask us

Having a problem with my wiring on my renault. When I put the
indicators on and then hit the brakes, the indicators and brake lights
will blink together (Christmas tree!), or the indicators will go off
completely once the brakes are applied!

Update to my last post...felt the pipes going into  the heater matrix
through the bulkhead,,,one side is very hot   but other is cold..does
this mean that the matrix could be blocked or airlocked ..if so which
one is most likely

Don't we already pay as we drive in tax on petrol? Why not just up the tax
on petrol heavily. It would be a lot cheaper/easier/quicker than installing
GPS devices in every REGISTERED car in Britain. How do they plan on doing
this? Sure if it becomes so expensive to drive I might ...

I have 92 1.8i cavalier where the the heater only justs gets slightly
warm..the heater fan is working ok  anybody got any ideas

To anyone who knows the history...
I have paid my money and taken my chance, made my bed and will lie in it
etc.
But after new rings and bore cleaning I am noticing oil use to the tune of 1

How can I tell if the cylinder block is aluminium or cast iron.
My 1992 car with K9A engine was produced just as they changed from al.
to cast for the block and they have different torque settings.
John

   presently replacing numerous rusty bits around the suspension control
arms on a 12 year old VW Golf. Is there anywhere on line I can buy new high
tensile nuts and bolts?
TIA,