Has anyone got a quick and dirty fix to stop the rear window creeping down?
Preferably without taking off the door card, because it's pissing down out
there. I'll get frozen and very wet doing the bit of wood trick. :-)

When the seatbelts dont rewind fully is there a fix? Are the reels
servicable?
It seems beyond the kids / MIL to make sure the buckle is back in the car
and the sound of the door being slammed on it is wearing me down.

My dad's forntera diesel turbo, has a turbo fade
proble.It's W reg and has had all the pipes replaced
but under towing conditions it fades often.
Any ideas ?

Hi, first post here.
My year 2000 206gti (40000 miles) has the following problem:
Occasionally when starting the car, the fuel pump does not prime (you
can hear it), and then of course the engine will turn over but not

Any comments as to whether this is a good/bad purchase? Basically I'm
interested in long-term economical transport, reasonable degree of safety,
and basically f.ck all else that I can think of. Parker's says it's
economical and reliable.

I need to replace cracked nearside fromt indicator housing.
I had a go this morning, but it looks like I have to remove the grille
and bumper to remove the old one.
Is there an easier way?

Hi chaps, in another thread I wanted to know how much to tighten a
"spindle nut" which is holding the brake drum cover on.  This is a new
thread because I have more data.
The car is a 1989 MAZDA 1.3.  I asked the previous owner and he had the

Has anyone any ideas please. The car is a 1.8 Litre petrol and
although the engine turns over quite heathily, occasionally it can be
very hard to get it to "fire".
Once running there is no misfire or anything abnormal and the engine

I have got the caliper "open" (removing the bottom bolt), how do I get
the brake pads out of it. There is shims and anti rattle clips. I dont
want to bend or snap or anything.

The car is a 1996 Peugot 106 Graduate 1.0. On moderate to hard
cornering, I get a ticking/rumbling noise from the area of the front
wheels. It sounds pretty similar to the wooden creaking noise of an
unmanned rudder flapping about on a boat. Is this CV joints or something

I dont know much about cars and my problem is that. I bought a 2001
Polo clasic and I would like to fit in 18inch wheels. But I was told
that sometimes big wheels harm the steering rack. Is it possible maybe
to exchange steering racks maybe fit in Golf 4 steering rack?

how do i find out if my gearbox is goosed or my selector.lost my 1+3+5
gears

I got the manual.
I found the page telling me where it is.
Just spent 30 minutes looking for it....
Can someone please, please help ??

How can i put a spindle nut on my rear wheel so that it is of the right
tightness?  I don't have a torque wrench.
--------------------
This is the situation in more detail ......

I'm trying to positively ID a friend's engine type in order to buy new
spark plugs, however, I've had such conflicting information that I'm
more confused than when I started.
The Car's details are: