| Thread | Last Post | Replies |
|
| car wont start | 31 Jan 2007 20:22 GMT | 1 |
ive just read you post, sorry to bother you but im having a same problem with my honda civic vti!!! but my car wont start, i had to rewire my whole car as the previous
|
| Astra 1.4 2000/W Overheating | 31 Jan 2007 19:57 GMT | 6 |
Can anyone help me with an odd situation. The other day i was driving my car and all of a sudden the temp started to rise. The temp would rise when driving up hill but would reduce when going down hill, it also climbs when stationary.
|
| VW Polo starter noise | 31 Jan 2007 19:06 GMT | 5 |
I have a 1996 VW Polo that makes a loud graunching noise when I start the engine. A new starter motor was fitted but the noise is still there. I thought the ring gear on the flywheel must be damaged but if I prevent the
|
| Another Spongy Brakes question - Zafira | 31 Jan 2007 18:04 GMT | 8 |
I did my front pads today and now i have spongy brakes. Where the fook did the air come from?? I didn't even open the brake fluid resevior thingy, all i did was disconnect caliper, remove old pads, push back the piston, insert new
|
| escort steering ! | 31 Jan 2007 15:29 GMT | 3 |
Can anyone help please. ive got a p reg escort 1.8 zetec ghia, that when excelerating the car raises the front end and violently pulls left,then on de-exceleration pulls violently right ?(worse when in to a left hand bend) a bit like
|
| Car transpotation costs. | 31 Jan 2007 15:12 GMT | 5 |
Anyone have an idea of the cost of transporting a car? Is it usually based on a fixed fee plus mileage? Can anyone recommend a company in Essex that will do this job for me? Many TIA
|
| Mondeo 1994 fuel pump change | 31 Jan 2007 14:09 GMT | 4 |
Haynes "rated" changing fuel pump with 5 spanners - only for expert DIY-ers and also strongly recommends the use of Ford special tool to remove/refit the pump. Is the procedure really that special and the Ford special tool so
|
| Estate Car bumper protection | 30 Jan 2007 22:07 GMT | 13 |
I want to protect the upper flat surface of my estate car rear bumper from scuff damage when removing items from the load bay. I'm looking for some sort of heavy duty self-adhesive black vinyl that can be cut to shape and then stuck down.
|
| VW Golf Maintenance | 30 Jan 2007 18:08 GMT | 21 |
Can anybody advise how to switch off the alarm which sounds when service is due. The alarm sounds every 10000 miles or 12 months whic ever is the sooner. My wife only does about 6000 miles/year so th alarm sounds every time you start the car
|
| P Reg Ford Fiesta 1.25 Clutch Problem | 30 Jan 2007 15:15 GMT | 3 |
Help. My 1996 Ford Fiesta 1.25 Zetec 16V has a strange intermittent clutch problem especially when the car hasn't been used over night or from cold. It has a hydraulic clutch. several times a week you press the pedal and it goes right to the floor but the clutch doesn't
|
| mx5 cigarette lighter | 30 Jan 2007 14:45 GMT | 1 |
could anyone tell me how to remove the cigarette lighter from a 2004 MX5. We think the earth wire is no longer connected so need access. Fuse is intact but no power to the lighter.
|
| Front impact repair advice | 30 Jan 2007 08:05 GMT | 1 |
My trusty old Cav is feeling a bit poorly. I ran into the back of a 4x4 yesterday and have taken out the bonnet, lights, slam panel, grille & panel below the grille - but the bumper, wings etc - the impact didn't even trigger the airbags.
|
| Mondeo oil spring | 30 Jan 2007 05:59 GMT | 10 |
The nearside front coil spring on my 51 plate Mondeo has been dislodged from the lower end recess. I don't have the means to do this myself so how much do you reckon will be a fair price to sort out? Thanks in advance.
|
| BMW E36 Brake Pads | 30 Jan 2007 00:14 GMT | 6 |
Could someone let me know how I get my cylinders to go back when changing my brake pads Many thanks Bruno
|
| BMW E36 Brake Pads | 30 Jan 2007 00:08 GMT | 2 |
Could someone let me know how I get my cylinders to go back when changing my brake pads Many thanks Bruno
|