| Thread | Last Post | Replies |
|
| starting trouble - nissan micra L shape | 21 Mar 2007 22:57 GMT | 10 |
I have a typical problem. I have a Nissan Micra L shaped. Off late it is giving me trouble when I try to start it in the morning. I have got the engine oil , oil filter and spark plug changed but og no use. Once the vehicle get started during the later part of the day it runs
|
| more starting trouble | 21 Mar 2007 22:52 GMT | 7 |
...hoping my cambelt isn't not be involved in this... Hyundai Accent, S reg (70k on the clock, cambelt changed at 40k) When I turn the ignition, I can't hear the starter motor as such, just what sounds like a hammer drill under the bonnet :-}
|
| Spare wheel question | 21 Mar 2007 17:41 GMT | 11 |
this is a weird question, which is why I`m asking here before going to a garage :-) Basically I`ve been given a new wheel, the tyre of which would fit on my car, the hub of which won`t fit on my car. My current spare is pretty
|
| citroen start problems | 21 Mar 2007 13:28 GMT | 3 |
My citroen xantia has developed an intermittent fault It starts ok and drives and when I switch off and try to restart -dead as a dodo. Leave it 30-45 minutes reset immobiliser and it will start. New battery fitted in case but still same problem any thoughts john
|
| Ford KA Door Wiring Loom | 21 Mar 2007 12:19 GMT | 4 |
I guess this one must have come up before as it's a known prob with the old KA's . A couple of the wires have severed in the door loom and the drivers electric window and speaker don't work . Unfortunately the elec window one has gone right at the end so I'm having difficulty
|
| axle stand point | 21 Mar 2007 11:12 GMT | 31 |
I'm a little confused on where to put an axle stand. I understand I should get under a car without one incase the jack fails. I have read in a vw polo forum (car is a 1.4 polo 2001) that I should use a supplied jack and jack up on a seal and put the axle stand on the jacking
|
| YES | 21 Mar 2007 10:24 GMT | 6 |
Explore and recognise the words meanings in the scriptures http://www.qurancomplex.org/Quran/Targama/Targama.asp Explore the greatest life of the most recognized man in the history of humanity.
|
| Are tachometers unneccessary in automatics? | 20 Mar 2007 22:45 GMT | 30 |
Having recetly starting using an automatic, is the tachometer unneccessary?
|
| Vauxhall Z 18 XE spark plugs | 20 Mar 2007 21:10 GMT | 6 |
I went to check the spark plugs on our Vauxhall tonight with a view of checking on their condition and finding out what size were fitted. I removed the coil pack only to find the spark plugs were well and truly hidden well down in the cylinder head. Not only that my usual spark ...
|
| What a rusty car | 20 Mar 2007 20:08 GMT | 29 |
Have you ever seen a rustier car for sale than this? http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&ih=016&sspagename=STRK%3AMEWA%3A IT&viewitem=&item=260098191591&rd=1&rd=1 The guy bought it for banger racing but it was even too bad for that! Checked the DVLA website and it has ...
|
| Starting problems (again) | 20 Mar 2007 13:25 GMT | 5 |
I posted a little while back about starting problems with my 1.4petrol 2004 Fiesta. I'd put it down to using my sat nav, but I've now ruled that out. Bascially what happens is that whenever I've been on a longish trip where the engine has been worked hard and then I leave the car ...
|
| LONDON numberplate | 20 Mar 2007 12:54 GMT | 8 |
Here's one for you folks to work out ... we were on the M1 yesterday going south, towards Derby and saw the Police had stopped a car. The numberplate was clear in huge block capital letters and read as LONDON as we trogged past at 68 mph. What number/letter combination would ...
|
| Vauxhall Corsa | 20 Mar 2007 11:29 GMT | 14 |
Hi am hoping someone can help? Yesterday as i was driving home from work i joined a dual carriageway at 40 mph when my 2004 Vauxhall Corsa 1.2 16v made a sharp thudding noise followed by a rapid rattling noise. The engine management light came on and i stopped on the side
|
| Car Trailer wheel studs | 20 Mar 2007 11:25 GMT | 2 |
Hi Group I need to replace some wheel studs on a trailer fairly old trailer. M16 67 long of which 38mm of thread, 22mm of spline. I've tried a few places but no luck.
|
| mercedes a class service costs | 20 Mar 2007 08:39 GMT | 2 |
new a class service costs? worth it? do it yourself? warranty?
|