In 2005 I lost my licence for 3 years. I was told that after 2 years I
could go back to court and apply for my licence back. Has anyone here
had any experience of doing this?
Neil Baker

I'm new here but really need some help!!!
I haven't been driving my Puma much but now that an MOT is due a
couple of things have just gone wrong with it and I don't know how or
why it happened!

Not an area I've bothered to look into much before but in theory thinner
oils might reduce internal friction enough to affect power and therefore
possibly fuel consumption. I've never considered it to be likely that the
effects are going to be big enough to be noticeable between ...

An idle thaught I came up with today, after thinking about a recent
purchase.
A popular idea is that the newer the car, and or, the lower the mileage, the
more reliable it is likely to be.

I've just had my drivers side window fall down into the door, because a
couple of unbelievably flimsy plastic clips snapped. A very common problem
apparently as there's an all alloy upgrade clip.
This just a month after the mirror joystick snapped off - another very

Guys bought a 2003 307 HDI today alls good with it but it has a tape player?
whats that all about :-)? lol  anyway just a quick query anyone know if this
is just a standard fit?  i.e it does look a standard fit and has the 4 holes
at each corner to suggest it will come out ok    ...

Is there any particular wheel order that one should follow when bleeding a
brake system. Should one start closest to the master cylinder then progress
further away... or the other way around?
thanx

Looking for a set of pads for this car but I'm not sure which ones to
get as there are several 1.8 varients out there on the GSF website ...
I put the reg into an insurance website and it came back as:
VOLKSWAGEN, GOLF GL,1781cc,5dr(1992-)

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&ih=019&sspagename=STRK%3
AMESE%3AIT&viewitem=&item=290132152405&rd=1&rd=1
I don't want that at all.
No way would I want a 160bhp Metro. Not at all. Never in a million

I'm about to fit a new set of front disks & pads (well when it stops pissing
down) and read that copper grease should not be used on the sliding calliper
pins. I have a tube of Servisol Silicone Grease and wondered if that is ok
to use on the pins or should I use something else? ...

I'm having a few problems with A Witter tow bar electrics kit and hope
someone can help.
I'm fitting the kit to my 1999 Ford Focus hatchback - for simplicity I
decided to get the specific kit from Witter for this car, which from the

I have a small leak in a 1993 Pajero 4x4  -diesel's fuel pump. Probably
due to the age of the rubbers etc and I was wondering if there is any
liquid I can place in the fuel to try and revitalise the seals in the
pump. Its not that bad but wondered before I get a fuel pump rebuild ...

I thought its about time I bought one. Seen some cheapish ones on ebay and
some nice digital ones but found a decent spec one at halfords here it is
http://tinyurl.com/3yjbeq
What do you reckon, worth the money ?

Powering a car with solar panels is a relatively easy task, but on a
motorbike
it's a lot harder to find flat surfaces to catch the sun. That means
that a solar

Does anyone know where I can get hold of a driver's seat (RHD) seat frame
(the bit that bolts to the floor and includes the seat sliding mechanism)
for the latest shape 2005-2007 Ford Focus?
I only need the seat frame complete with the floor-mounting brackets, not