my older sis ditched her rather sh.t S reg corsa friday for a X reg skoda
Fabia, nice little car! 1.4 16v alloys pretty quiet too and handles really
well (i tested that hehe)
anyway the radio is pants cassette thingy (i can't even find a blank tape in

Well guys i finally got round to de-catting the cav was previously just a
single box plus cat. exact same exhaust system but minus the cat and i feel
the car is a bit less gutsy in the midrange(although does feel a bit
peakier. anyone care to share some thoughts on this would ...

was at the usual jap bluewater meet last night and saw a Supra with a jap
plate, something like 66-663 i think it was which is what the japs use. how
do you get away with using a jap plate in the uk? i thought if it's foreign
registered you can only use it on a different coutry ...

"SAAB 9000 Aero 2.3 16V
Turbo Manual, P reg. 87000 miles, full Aero spec, electric sports
leather, CD multiplay, aircon, airbag, 16 deep alloys etc, with full
history & bills, proper car, px welcome. £2,499."

Got a new flywheel and organic clutch for the WRX today.  CNC machined
chrome molly job.  Nearly died when I pulled it out the box.  Has more holes
in it than Speilburg plot and weighs f.ck all*.  My mechanic laughed at me
because the clutch cover was purple anodized and he told ...

took as many as i could, wanted to take loads more than i did!
http://www.wellcheap.com/gallery/JAE-23-07-05?page=1

Totally and completely legitimate $$$$
Read this and you will make tons of money guaranteed!
NETWORK TOGETHER AND MAKE MONEY USING PAYPAL
Dear Friend,

Picking it up at the weekend (hopefully)
http://www.carlgibbs.com/newmr2.html

Fiats new Panda... the new Multijet Diesel one.
Is it as good as 'they' (1) say, or would I be an eejit to get one?
Seemed quite nice on the test drive, and the finance deal they've offered me
on a new one is pretty good - also, being what it is, I expect it not have

How far could you safely bore out a 1.8 block? Since I have located some
forged JE pistons in the US for just under £200 and I have had no luck
finding a suitable 2.0 8v Audi block.
The problem is, the pistons are designed for a 2.0 block, so will a 200cc

http://www.trademe.co.nz/Trade-Me-Motors/Cars/Nissan/auction-31277633.htm
i want! :)

I get the SD1 EFI back next week after a full body repair and re-spray.
Judging by what I've seen of the work in progress it should be an
excellent job.
I've always thought - even with the 15" wheels - that it would suit larger

Thinking of buying a new pair....is it ok to buy them on line ? saw
some at http://www.uknumberplates.com

Any good?  Specifically a 1986 model, so one of the first I think

http://www.bobbeh.co.uk/video/2005-NURBURGRING_high.wmv
right click save as, pretty long :)