How the *f.ck* do you get them back on without cross-threading the
mounting bolts?
I'm working against the tension of the anti-rattle springs on the top of
the pads, and it's bloody hard work.

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=4561280339
"Vehicle Description  
Everybody needs one of these, cleaning out the garage, this little car
is so much fun, it is thrust powered by 2 GE t-58 turbines, has 4 fuel

It was a bit of a battle but the car is back together now.
All seems to be working from my short test drive - I probably shouldn't
have but for my own piece of mind I gave it 3 40mph emergency stops -
enough to get the ABS to kick in.

What do you think of these features for a £400 aftermarket ECU?
CONVENIENCE:
Utilizes factory input sensors
Crank or distributor-triggered ignition

On the way home last night (about half past eleven) the road I normally take was
closed for road works so I take a detour up another road I haven't been on for
about a week. Joined the road and accelerate upto 60 as normal then pass a new
repeater at the side of the road with 40 ...

http://cars.msn.co.uk/carnews/streetracejun05/Default.asp
Bit quick for anything atcually.

well thought this might be interesting.
Mine would have to be 2l 16v Nova just for the sheer sleeper value and
performance to pounds value 170 bhp in a car weighing 850 kilos built for
1500 quid

Brakes were making a little noise at higher speeds, outside of discs looked
okay but as they had a lip around the edge decided to replace them anyway.
Pulled the old ones off and this is what I found
http://www.wellcheap.com/gallery/Homers-Gallery/break . A quarter of one pad

I am currently wanting to mesh the air vents on my Renault Megane Coupe's
front bumper, does anyone know of a good way to do this?

Just on the Bugatti website there's a 360 degree view of the engine available in
both opaque and transparent. What a masterpiece, the 2 massive intercoolers
running along the top, 8 exhaust outlets feeding 2 manifolds each with a turbo
per side this must be the worlds most ...

http://www.famousbrandwatch.com

Oh what a day todays been
all started so well with collection of some nice shiny new bits from the
factors
The replacement exhaust gasket(after the muppets gave me a C20XE one last

Some friends are running one of each of these classic 80's turbo
hatches, to see which is most expensive to run, or has most problems !!
We are putting loads of info and accounts on the website at
www.TurboMoneyPit.co.uk so if anyone has any advice or suggestions,

well cars back up and running and the alternator isnt charging
changed the alternator for a new un still no joy
continuity checked on the wiring as well as earthing bar.
alternator still not putting out