Does anybody know what is meamt with R100 and R200 in connection to
the Rover (Metro) car type?
Where can I find more about this??
Tx

I use a 1966 Land-Rover with a Ford Essex V6 engine conversion (lovely old
thing!) to do local trips towing a powerboat, carrying canoes and
windsurfers etc. The last garage selling LRP locally is ceasing to do so
shortly, leaving me with a problem.

I'm after the best in Scalextric cars, the old ones, no eBay rubbish.
Anyone know where can I get them?

I've recently got my hands on a 4.0 XJS. The speedo gets to about 50
and then starts wobbling about, before heading upwards. The result is a
shortfall of about 5-10 mph.
Does anybody know what the speed in gears are? Per 1,000 revs in fourth

Hi, this is a 52 MG TD. The gauge is non-electrical, and appears to
work by the expansion of a fluid in phial, which is then pushed up a
pipe to activate the gauge. As I say, assume this is the way it works,
but not sure.

copied from the Herald Yahoogroup
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&category=29760&item=4551372985&rd=1
How much will it make?

A modest but solid starting point
http://freespace.virgin.net/ian.cvt55/webx.htm

Hi, I want to top the the oil up in a rear axle, as previously it was
leaking, but the filler plug is seized.
Someone has tried to remove it before slightly rounding the nut so that
now a socket will not fit.

Anyone fancy an Arizona T series? Would it be a TC?
http://www.collectorscarauction.com/item.pl?item=1100854578
95% complete? Looks like a whole lot more missing to me!

Does anybody know what these wheels will fit?
The size is 5x12x19 mmIN stamped on the rim.
PCD = 114.3mm
Have been to my local wheel specialist and they have drawn a blank. we think

I am having a clear out and I have come across a new McPherson type
suspension leg for a Ford.  Trouble is, that I don't know what it fits, I
could hazard a guess at Capri, but does anyone know what it really fits: It
is a Fitchel and Sachs leg marked with a big L and the numbers ...

There was a thread a little while ago about this but it ended up in a
discussion about insurers own breakdown cover. My insurer doesnt offer this,
and my current breakdown cover mob dont either, so I started ringing round
to cover a 9 day trip to France for the Minors On Tour ...

I am looking for rear wheel cylinders for an Opel Kadett B 1972 1.1.  Any
idea where I might be able to buy some from as so far I've been drawing a
blank!
Ross

I can buy a 1989 Austin Metro car.
The Haynes manual I saw, mentions the need for consultation of a
Rover dealer when the suspension system needs to be filled up, or when
work on the suspension is needed and the system has to be

Brand new accelerator cable(bought from a bike shop), on a '79 Spitfire,
Weber carb.
After doing away with the old ZS carb linkage retrofitted on the Weber,
I had to get a new cable. But, as being a new cable, it sticks. WHat's