| Thread | Last Post | Replies |
|
| Canadians where do you buy your Volvo parts. | 31 May 2005 16:29 GMT | 4 |
What is your experience with buying Volvo parts? Where do you buy them? Buying parts in the states, is it worth it? Do we have to pay duty and tax? VLVWORLD.com is Canadian owned located here near Montreal, but the parts are in $US and some come from USA. What is you experience with ...
|
| Bendix or Girling? | 31 May 2005 07:16 GMT | 3 |
Volvo 940 GL 2.0 1991 Estate UK, car has started to make a horrible noise under braking. Intermittent, not always. Comes from Passenger side front, took the wheel off last night, outside of disc looks good, pad this side has almost the thickness of a cd case on it.
|
| Replacement Door Handles | 31 May 2005 07:01 GMT | 1 |
After having problems with the interior driver's door handle, it finall just broke altogether today. I now have to open the window and use th outside handle to get out. Does anyone have a recommendation for wher I could purchase a replacement part
|
| 960 24vBlock water leak | 30 May 2005 22:03 GMT | 8 |
After main dealer failed to find a water leak and them fitting new hoses and thermostat housing I decided to look for it myself. 10mins. later I found the leak, it is coming from a crack in the cylinder block about 1/2 way up behind the exhaust manifold where there is some "light ...
|
| 740 pinion seal | 30 May 2005 20:38 GMT | 1 |
I was ready to do this yesterday. Did some research at brickboard and figured I had all the info and tools and the replacement seal to get it done. I never expected the label on the differential housing would be missing!
|
| 10 valve or 20 valve | 30 May 2005 20:07 GMT | 2 |
Whats the obvious way of knowing which is which on the 850 series? Does the 20 have more ooomph!!!? And finally is either type the one to avoid?
|
| Hood Release Cable - Volvo 240 | 30 May 2005 19:03 GMT | 3 |
Nice weather has finally arrived , and I have replaced the hood release cable on my 1990 240 wagon (with air bags.) (I got the new cable from Swedish Engineering, and it's fine.) Here's my question: I can now open the hood by pulling on the
|
| A/C compressor starts/stops continously | 30 May 2005 17:38 GMT | 7 |
When the engine is idling my a/c compressor from time to time starts/stops continously. When I speed up and let the engine fall down to idle it migth stop the flickering between start and stop.
|
| 850 Seat removal? | 30 May 2005 15:14 GMT | 1 |
Heips; My child arranged me some cleaning work (vomiting...) and to do it properly I think I should remove the passenger front seat (Volvo 850, 1993, no power seats): how do you remove the seat? (I guess real simple...).
|
| Electrical issues? | 30 May 2005 15:01 GMT | 5 |
Hopped in my '74 144 to go to class this morning and the AMP idiot light kept glowing . I went around the block and noticed that the gas guage wasn't registering and the tach wasn't functioning. I took my truck to school and started pondering the finer points of alternator ...
|
| Volvo 850 GLT wagon rear suspension | 30 May 2005 14:48 GMT | 2 |
Every time I go over uneven part of the road I have loose vibrating metal sound from the rear top. I checked the spring bump stop and it looks secure. I think it is the rear shock mount. What are the symptoms of a defective shock mount?
|
| b200f engine | 30 May 2005 13:17 GMT | 3 |
Hi Group, Can anyone tell me if the B200F is a interference or non inteference engine please? Thanks guys and gals
|
| Fuel Pump fuse | 30 May 2005 11:41 GMT | 2 |
My 83 GL is occasionally blowing the no#7 fuse.It is hot to the touch sometimes.Could it be the relay or ECU?Thanx mangoes61@yahoo.com
|
| Headlamp aim for MOT test | 30 May 2005 10:32 GMT | 5 |
My offside headlamp beam is much too high and is about to fail the MOT. Does anybody know how I can set the headlamp aim to within UK MOT requirements please? Thank you,
|
| 87 740 auto tranny problem | 30 May 2005 05:19 GMT | 5 |
I have an 87 740 non-turbo, 160K miles, and auto trans. The trans is the better of the two which IIRC is the AW. Over a period of a few days the trans started shifting at higher revs until it started not going into higher gears at all. Last night I checked the fluid, which ...
|