| Thread | Last Post | Replies |
|
| 284f cam recamendations | 18 Dec 2003 02:35 GMT | 4 |
hey guys, back form school for bit and thinkin of throwing a new engine together for my bus. Now my question is im a stock 1600 guy (aka thats all i have built) now I have this 284F cam (duration is 284*. int. & exh. @ .050" is 244*, lobe center is 108*. valve lift is .429" ) laying ...
|
| Hot air - should you feel a draft? | 18 Dec 2003 00:46 GMT | 4 |
Trying to get the heater bits on my 71 bus up and working again. The PO had things pretty disconnected. As I understand it, when you haul down on the them two red heater control levers you go into lightspeed. No, wait. That's the Millennium
|
| clunking sound | 17 Dec 2003 23:56 GMT | 6 |
My wife's '60 rag on a '68 pan has developed an intermittent "clunking" sound coming from either the trans or the axles. There is no noise when the car is not moving and the engine is running so the problem would appear to not be coming from the engine. The trans shifts through all ...
|
| Accelerator cable | 17 Dec 2003 23:52 GMT | 5 |
I am getting ready to replace my 74 bug cable, any specials suggestions to make my life easier?
|
| engine on workbench question | 17 Dec 2003 23:27 GMT | 1 |
is it safe to set the engine on a steel workbench? ive never worked with magnesium cases and such, will it hurt it at all?
|
| Opinions on JBugs? | 17 Dec 2003 21:52 GMT | 9 |
I'm considering purchasing one of JBugs interior kits. According to the catalog I received from them, they're using TMI products in their kits. Anyone have any firsthand experience on their quality? Customer service? Thanks!
|
| buying an 1303 from 73 - look for rust where? | 17 Dec 2003 21:16 GMT | 1 |
Hello aircoolers! I'm going to buy an 1303 from 73 - Where do i have to look for rust before buying? I'm living in Denmark. So the car does. Greetings from Denmark
|
| VW Van Fire | 17 Dec 2003 16:09 GMT | 62 |
Click on link to see photo http://www.surreyleader.com/pages/images/EVAN/PAGES/VWVAN.HTM Bill Berckman 67 Beetle Pictures at http://community.webshots.com/album/65271125OySKDA
|
| 76 S/Beetle carb question | 17 Dec 2003 16:02 GMT | 1 |
Hey group, I yanked the H30/31PICT carb off my 76 Super Bug and begin rebuilding the carb. I guess my 45 year old eyes were not sharp enough to pick up the markings on the two jets that screw into the Right side of the carb body and
|
| Message for Nor-Cal Dave | 17 Dec 2003 14:12 GMT | 2 |
Help me understand something........I've posted here for you to reply, I've sent e-mails to both your addresses in which I included my cell phone....but have YET to hear from you. This is my last attempt. Finis.
|
| My aircooler produces fart gases | 17 Dec 2003 12:44 GMT | 2 |
Oh no, it stinks unbearable ! Like the gas out of 100 colons ! What can I do?
|
| OT:Miserable failure | 17 Dec 2003 05:15 GMT | 79 |
Step 1: Go to Google. Step 2: Enter "miserable failure" without the quotes. Step 3: Click "I'm Feeling Lucky" to be taken straight to the #1 result. G
|
| 2003 Passat GLS and gas grade question | 17 Dec 2003 03:33 GMT | 3 |
Does anyone know if Regular gasoline Can be used? I've tried both Plus and Premium grade gasolines and found that while Plus works fine, Premium Does make the engine run smoother and quicker.
|
| Amusing | 17 Dec 2003 02:03 GMT | 3 |
NOT OT! It really is a VW Bug. Rather fun. http://www.pccomix.com/freebies/Virus%20/virus.html jjs
|
| Heat Risers | 17 Dec 2003 02:01 GMT | 2 |
My 66 1600cc VW Bug has been having problems in the cold recently. It has a tendency to stumble from 1st and 2nd gear and overall sluggish performance until it is fully warmed up. I've changed the carb, put new plugs (gapped at .70mm), adjusted the timing and replaced the
|