I had a caliper stuck.  It turned out to be the hoses.  The pressure of
the master cylinder would force the fluid through the hose to engage the
caliper but when the pressure stopped, the hose closed with the pressure
remaining on the brake resulting in smoke and lots of heat.  ...

Tomorrow night Monster Garage is building a monster VW.
href="http://albums.photo.epson.com/j/AlbumIndex?u=4025706&a=30209382&vt=vp">Den's
1977 Puma</a>

I am looking for a shop that builds sand rails and is located in the
Southeast since I live in Asheville NC. Does anyone know if such places are
around these parts?
Thanks,

i have the vw manual with repair times for type1&2 - is this what you
are looking for?

I hope it's ok to post for sale here, please forgive or delete if not.
I prefer United States sale but will consider international.
$4000.00
http://photos.yahoo.com/volksrod70

The present owners have it with us on consignment for $4,995.  Pictures can
be seen at www.classicar.net.

how much does the genuine article cost????

I used to post here on a fairly regular basis back in 2001, but haven't
been here hardly at all in the past few years, mainly because school
and work got in the way of my project. After contracting out the
rewiring and engine work, I'm finally getting my '77 T1 ready to go,

VW lost $1.29 bilion in North America last year and for some reason
VW's chairman has a problem with that.  There is some group of people
that will be traveling around (hopefully in a Toyota) looking for
peoples oponings about what people want in cars. (how about aircooled)

Here is a long hidden video of Shag's family. See if you can pick him out of
it:
http://www.bpninc.com/evideo/video_mac_hi.mov
Neil

Besides my channels, I also need to replace my front firewall. Found that
out when I took the body off the pan recently and started poking around.
Also, half of the rear cross member (that piece welded to the rear firewall,
what the channel is welded to) is rusted out, so will also ...

I have a 1960 bug. I have been unable to find an accurate electrical
diagram.  All of the diagrams that I have seen for 1960 do not look
like my car.  I have a fuse panel with 4 banks and then mounted to the
inside of the left front fender is another fuse block with four banks.

Hi everyone! I'm looking for original dash grill panels for a 74 vw.
Can anyone send me to a place on the net that may have them? Thanks!

Deck Lid - Quick-Release Hinge Pins
Hi!
My Empi brand Decklid Quick-Release Hinge Pins came today from Cip1.
Can someone please give me some simple instructions on how to install

Cannon? Or maybe it's just waking up.
http://www.strangevehicles.com/images/content/108979.jpg