| Thread | Last Post | Replies |
|
| KonK out under load | 16 Aug 2005 16:59 GMT | 1 |
Hi, Anyone know what might be going on with my T2... perfect on a short trip but on a hot day on a motorway for example when the engine is running hot & the van's under load it will start juddering - and then konk out. After letting the engine cool - It will get me a few more miles ...
|
| Cool ! it works - oh yeah OT: Hi ;-) | 16 Aug 2005 16:22 GMT | 3 |
Just a quikie to say Hi. Got a new PC built. Just running Linux at the moment (knoppix) Hope you'z are all ok and having fun. I notice a few new names popping up - Hi and welcome to all ! I hope to post proper soon
|
| Bleeding brake lines 66 vw | 16 Aug 2005 14:59 GMT | 2 |
what size tubing (ID) is used to bleed the brake lines for 66 vw? thanks, -tom
|
| Good tires? Looking for tire source | 16 Aug 2005 00:54 GMT | 4 |
I was wondering if anyone had purchased those cooper tires from the real source, I think they are $200 plus S&H. The belts are showing on my tires and 2 are flat, so it's off the road until I get new ones. Would kinda like to get them sooner than later. Are these a good deal
|
| Hard starting 74 beetle. | 15 Aug 2005 17:59 GMT | 4 |
Hi everyone ! When cold the engine starts intantly 99% of the time. Once warm engine is hard or slow to start much of the time. It seems as if its flooding. HELP!
|
| 66 Bug Door handles | 15 Aug 2005 01:54 GMT | 2 |
okay now I'm frustrated. I've been trying to get the door handles out so I can trouble shoot why the buttons are loose and the key wont lock the doors. I have went thought my Bentley Manual and the Muir manual and can't find anything.
|
| Frame head replacement | 14 Aug 2005 17:26 GMT | 7 |
I am having the framehead on an IRS RHD car replaced with a new one from a beam car. I appreciate its got to be right so the local VW top man is doing it. I'd like to save a bit of his time and my money by cutting the holes in
|
| bad noise while turning | 14 Aug 2005 14:09 GMT | 1 |
77 Sb convertible here. Just the other day, I took my car for a spin. Everytime I turn left or right I get a loud scraping noise coming from the rear of the car. I know it has to be something with the flywheel/transaxle but I’m not sure exactly. Anyone have any ideas???
|
| how are OEVeeDub and BFY as vendors? Vendor rating in general? | 14 Aug 2005 12:41 GMT | 6 |
Was looking to get some parts and was wondering if www.bfyobsoleteparts.com is an ok place? How about http://www.oeveedub.com? On a different note: how about we set up a simple applet on a web site
|
| In need of thermostat and parts | 14 Aug 2005 12:26 GMT | 3 |
Any one have access to a thermostat, rod, flaps etc.. My bug's thermostat and flaps assembly is missing. Any help is appreciated. Thanks
|
| treasure cove found | 14 Aug 2005 00:41 GMT | 3 |
Today I met a guy who has been in VWs as long as anyone I have met before. He invited me to come out and look at his collection. Wow, a bonanza. Thousands of parts, dozens of cars, tractors, and even a restored 49' Airstream 14' trailer coupled to a restored 52' Chevy six
|
| 67 vw bug brakes | 13 Aug 2005 19:32 GMT | 6 |
I have a 67 VW bug that has been sitting for a couple of years. I am now trying to move it but it feels as though the brakes are stuck. The emergency brake is off and the clutch is pushed to the floor but it still doesn't move when pushed. Any ideas?
|
| Heater Blower Fans Deteriorated! | 13 Aug 2005 16:25 GMT | 3 |
I have a 1973 VW Beetle. The other day I was inspecting the add on blower fans for my heater. I hardly ever used them, since I was concerned with the current draw on the battery.
|
| Bussy's First Breakdown (Story) | 13 Aug 2005 15:26 GMT | 2 |
This is the third summer season since Bussy got his transplant - a 2.2 Subaru Legacy motor out of a totalled wagon. There were a couple little details to straighten out in the beginning, but there have been NO failures since the conversion. No breakdowns. No getting stranded. Not a ...
|
| Need measurements from a good '68 | 12 Aug 2005 20:28 GMT | 3 |
Here's the deal. My '68 westy took a shot in the nose before I owned it. This pushed the A (hinge) pillar back a tad and the doors don't line up and close correctly. I am going to try moving them back using a porta
|