| Thread | Last Post | Replies |
|
| tie-rod end (and SF mechanic suggestion?) | 29 Sep 2008 22:54 GMT | 9 |
I have 2 dilemmas (a quartlemma?). 1) I don't know if I should have a lot of the front-end work (i.e. tie-rod end and king pin replaced) done simultaneously, or just the essential. 2) I don't know who to bring the car to.
|
| Canadian 69 ghia at Vintage Werks | 28 Sep 2008 11:51 GMT | 51 |
Here we go again This was actually bought here in the area and will be taken to Canada when finished. As seen in the pictures this 69 ghia has had lots of poorly done prior
|
| 1967 beetle won't start | 27 Sep 2008 23:21 GMT | 12 |
this one's probably basic...got a 67 bug that won't start, doesn't try turning over at all. battery is showing 13.4 volts, lights go on, but no cranking at all. red light is on, but not the green/yellow one. i have a kill switch on this, not sure how it works, but when it's off ...
|
| How much is this car worth? How much would a buyer pay on average | 27 Sep 2008 21:07 GMT | 5 |
In a nutshell. As much as you can get someone to pay for it. BUT. How much is a 1967 Beetle worth. Most of everything is original. But the bumpers have been replaced. Light surface rust. No body damage. No radio. Original interior. 2nd coat of paint done not exceptional
|
| new battery | 26 Sep 2008 20:51 GMT | 7 |
I've ordered a new 6V battery. 140 Ah instead of the usual 66Ah. AFAIK this is possible/able to fit were the normal battery should fit. Width is most important, lenght and hight are somewhat variable...
|
| 4 lugged rear drum on a 66 Beetle | 25 Sep 2008 22:02 GMT | 7 |
I converted my 66 Beetle's front brakes to discs with the 4 bolt pattern wheels. I'm not crazy about the 4 to 5 bolt adaptors so I want to buy new wheels, all with the 4 bolt pattern. The question is, can I put a 68 4 bolt pattern drum on my rear spindles without any problems ...
|
| bus repair at Vintage Werks | 25 Sep 2008 19:46 GMT | 4 |
this 74 westy needed rust repair in the corners battery try and windshield area http://good-times.webshots.com/photo/2507548270101866121mTWCxd this is a full resto for this 78 westy with custom paint.
|
| Which Weight Oil To Use In My Beelte? | 25 Sep 2008 16:31 GMT | 4 |
Which weight oil to use in my '73 Beetle? I have been using Castrol 40HD in hot weather, 30HD in mild weather, and 10 W30 in cold weather. Most seem to like 20 W50, but after reading Ed Hackett's article on
|
| What happened to the Beetle's heater | 25 Sep 2008 03:25 GMT | 4 |
On a late model Beetle last night I was driving down the freeway and it was cold outside. For a good half hour the heater stopped working. No air would pass through the vents at all no mater how many times I moved the heater control knob up and down. The hot air would
|
| oil seal 1600cc | 24 Sep 2008 16:23 GMT | 4 |
How do you change this Oil seal on the harmonic balancer of a 1600cc engine? What is involved and what tools are needed?
|
| Conversion from generator to alternator - who makes a good kit? | 23 Sep 2008 19:11 GMT | 5 |
My 72 SB has a junk generator, so we made the decision to swap to an alternator...I've been looking at different kits from SoCal and Mid- America. I wasn't real impressed with the Mid-America kit as the instructions for it were reprinted 74-75 alternator install instructions.
|
| Rear tail light swap on late model Beetle | 23 Sep 2008 17:06 GMT | 4 |
I have a late model VW Beetle with the elephant style tail lamps. Is it possible to swap these lamps for the 1971 style lamps? Do I have to change the rear wheel wells which I don't mind doing? How involved is the process and is it doable without help?
|
| Parts Made In China, Are They OK To Use? | 23 Sep 2008 02:52 GMT | 23 |
There are some pats made in China that I wold like to try, but I am hesitant to use them. Are they OK to use? They look a little rough around the edges.
|
| downshifting? | 22 Sep 2008 14:09 GMT | 15 |
Does down shifting cause any problems to engine? In other words, can it mess thing up internally? thanks, Mel
|
| Just one of those weeks | 22 Sep 2008 13:41 GMT | 13 |
Last week I thought I would have time this week to do some work on the garage & shop. But nope, our farm got hit by a tornado on Sunday morning. So once again the garage & shop get put on the back burner.
|