My DP 1776 developed a miss and I found the compression low on 1 & 2 .
Then I checked the valves and found them tight.  I'm going to check them
again soon, Could they be stretching ?  What else could it be?

My brother picked up a funky one and neither one of us can figure out what
it is. E-mail for picture.
Andy

Do those cameras that take your picture when you "Run" a red light also
"click" if you drive through a red that's been so for a minute?

I am getting ready to replace a noisy front wheel bearing on my '78
Cabriolet.  It has been quite awhile since I have done this.    How
much grease should be used?  When I took off the drum I found the
whole inner cavity filled with grease.  Is that necessary? Should one

I just bought a new set of tires for my '70 bug.  Since size 165/80R15
tires are getting harder to find, I switched over to size 185/65R15
tires.  My question is:
Do I need to use a different air pressure in the tires than the ones

Holy Cow!! Jim!! Long time no talk!! Didnt know u were on this list
too ;) Hows the T3 World???? Im getting ready to install oe FI back
onto my friends Squareback.. Hes having too much trouble with his dual
webers.. Wish me luck!! Say hi to Kieth and John for me!

any of you RAMVA-ites have a set of kadron intake manifolds for single
port? I traded a fellow some Kadrons and told him I'd try to find some
intakes for his single port engine... let me know.

Ok, haven't heard from me in awhile? I've advanced from all the DIY
boring, etc. and obtained a Kwik Way boring bar and stand these days,
set up for VW. I am now working on a 2332cc stroker. Here's the
question, and keep in mind budget....